Order Products : sales@su-jiao.com
DI-COAT E-4599
| Category: | TP, Unspecified , Thermoplastic |
| Manufacturer: | Hapco Inc. |
| Trademark: | DI-COAT |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LsWUDR_DI-COAT-E-4599.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
DI-COAT E-4599 Shore 90-95 A, elastomeric coatings that have been specifically designed to reproduce exact surface details. DI-COAT E-4599 is excellent for electrical insulation applications requiring non or low sag materials. DI-COAT E-4599 are formulated to withstand high wear continuous service. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D4669 |
| Weight - per cubic inch | 20 | g |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Service Temperature | 90 | °C |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gel Time 1(25°C) | 35.0 to 45.0 | min | ASTM D2971 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tack-up Time | 45.0 to 60.0 | min |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 90 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 17.2 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 330 | % | ASTM D638 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 6.6E+16 | ohms·cm | ASTM D257 |
| Dielectric Strength | 14 | kV/mm | ASTM D149 |
| Dielectric Constant | ASTM D150 | ||
| 1 kHz | 2.60 | ||
| 100 kHz | 2.70 | ||
| Dissipation Factor (25°C, 100 kHz) | 0.025 | ASTM D150 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 100, Mix Ratio by Volume: 100 | ||
| Part B | Mix Ratio by Weight: 75, Mix Ratio by Volume: 100 | ||
| Demold Time (21°C) | 1400 | min |
| Note Message | |
|---|---|
| 1 . | 100 g |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Spartech Polycom PP5430 | Spartech Polycom | PP, Unspecified | Spartech |
| Staramide AG10K | Eurostar Engineering Plastics | Nylon 66 | Staramide |
| DENKA EVA TEX 80 | Denka Company Limited | EVA | DENKA EVA TEX |
| HiFill® PPS GF40 BK | Techmer Engineered Solutions | PPS | HiFill® |
| Mitsui EPT™ 3092M | Mitsui Chemicals, Inc. | EPDM | Mitsui EPT™ |
