Order Products : sales@su-jiao.com
Parylene C
| Category: | PPX , Polyparaxylylene |
| Manufacturer: | Specialty Coating Systems (SCS) |
| Trademark: | Parylene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LsFvRE_Parylene-C.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Parylene is the name for members of a unique polymer series. The basic member of the series, Parylene N, is poly(para-Xylylene), a completely linear, highly crystalline material. Parylene C, the second commercially available member of the series, is produced from the same raw material (dimer) as Parylene N, modified only by the substitution of a chlorine atom for one of the aromatic hydrogens. Parylene C has a useful combination of electrical and physical properties plus a very low permeability to moisture and corrosive gases. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.29 | g/cm³ | ASTM D1505 |
| Water Absorption (24 hr) | < 0.10 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 80 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Coefficient of Friction | ASTM D1894 | ||
| Dynamic | 0.29 | ||
| Static | 0.29 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Secant Modulus - MD | 2760 | MPa | ASTM D882 |
| Tensile Strength - MD | ASTM D882 | ||
| Yield | 55.2 | MPa | |
| Break | 68.9 | MPa | |
| Tensile Elongation - MD | ASTM D882 | ||
| Yield | 2.9 | % | |
| Break | < 200 | % | |
| Oxygen Permeability (25°C) | 2.8 | cm³·mm/m²/atm/24 hr | ASTM D1434 |
| Water Vapor Transmission Rate (37°C, 90% RH) | 0.080 | g·mm/m²/atm/24 hr | ASTM F1249 |
| Carbon Dioxide Permeability (25°C) | 3.0 | cm³·mm/m²/atm/24 hr | ASTM D1434 |
| Nitrogen Permeability (25°C) | 0.40 | cm³·mm/m²/atm/24 hr | ASTM D1434 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Service Temperature - Short-Term | 100 | °C |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Hydrogen (H2) Gas Permeation (25°C) | 43 | cm³·mm/m²/atm/24 hr | ASTM D1434 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Continuous Use Temperature | 80.0 | °C | |
| Melting Temperature | 290 | °C | DSC |
| CLTE - Flow (25°C) | 3.5E-5 | cm/cm/°C | TMA |
| Specific Heat (20°C) | 712 | J/kg/°C | |
| Thermal Conductivity (25°C) | 0.084 | W/m/K | ASTM C177 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity 1 | 1.0E+14 | ohms | ASTM D257 |
| Volume Resistivity 2(23°C) | 8.8E+16 | ohms·cm | ASTM D257 |
| Dielectric Strength | 220 | kV/mm | ASTM D149 |
| Dielectric Constant | ASTM D150 | ||
| 60 Hz | 3.15 | ||
| 1 kHz | 3.10 | ||
| 1 MHz | 2.95 | ||
| Dissipation Factor | ASTM D150 | ||
| 60 Hz | 0.020 | ||
| 1 kHz | 0.019 | ||
| 1 MHz | 0.013 |
| Optical | Nominal Value | ||
|---|---|---|---|
| Refractive Index 3 | 1.639 |
| Note Message | |
|---|---|
| 1 . | 23°C, 50% RH |
| 2 . | 50% RH |
| 3 . | Abbe Refractometer |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sinvicomp SRF3735 | Teknor Apex Asia Pacific PTE. LTD. | PVC, Rigid | Sinvicomp |
| Moplen EP229R | LyondellBasell Industries | PP Impact Copolymer | Moplen |
| ARC ARC6601 | ARC Resin Corporation | Nylon 66 | ARC |
| HAIPLEN EP30 G6 | Taro Plast S.p.A. | PP Copolymer | HAIPLEN |
| Sylvin 86032-90 Clear 8443 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
