Order Products : sales@su-jiao.com
STRANOX PP-ST40%LFT
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Oxford Polymers |
| Trademark: | STRANOX |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LobtAX_STRANOX-PP-ST40-LFT.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| STRANOX PP-ST40%LFT is a Polypropylene material filled with 40% long glass fiber. It is available in North America. Primary attribute of STRANOX PP-ST40%LFT: Good Toughness. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.30 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 82.7 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 3.2 | % | ASTM D638 |
| Flexural Modulus | 4830 | MPa | ASTM D790 |
| Flexural Strength | 103 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 630 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 155 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVAMID® 6 HI HV TS | Plastcom | Nylon 6 | SLOVAMID® 6 |
| SUPRAN® PP1320 | SAMBARK | PP, Unspecified | SUPRAN® |
| Adell Polyamide BJ-14 Glass Reinforced High Impact | Adell Plastics, Inc. | Nylon 6 | Adell Polyamide |
| ALCOM® PA6 900/1 GF15 GB15 | ALBIS PLASTIC GmbH | Nylon 6 | ALCOM® PA6 |
| Pebax® 2533 SD 01 | Arkema | PEBA-Ether | Pebax® |
