Order Products : sales@su-jiao.com
Elasthane™ 55D MR
| Category: | TPU-Polyether , Thermoplastic Polyurethane Elastomer (Polyether) |
| Manufacturer: | DSM Biomedical Inc. |
| Trademark: | Elasthane™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LlXBMw_Elasthane-55D-MR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Elasthane™ 55D MR is a Thermoplastic Polyurethane Elastomer (Polyether) (TPU-Polyether) product. It can be processed by extrusion and is available in North America. Applications of Elasthane™ 55D MR include medical/healthcare and food contact applications. Characteristics include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.16 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (224°C/1.2 kg) | 13 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | ASTM D955 | ||
| -- 1 | 1.4 | % | |
| -- 2 | 0.50 to 1.0 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 55 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Ultimate) | 54.1 | MPa | ASTM D1708 |
| Tensile Stress | ASTM D1708 | ||
| 50% Strain | 11.9 | MPa | |
| 100% Strain | 15.0 | MPa | |
| 300% Strain | 33.7 | MPa | |
| Tensile Elongation (Break) | 380 | % | ASTM D1708 |
| Flexural Modulus - 1% Secant | 149 | MPa | ASTM D790 |
| Flexural Strength (5.0% Strain) | 6.20 | MPa | ASTM D790 |
| Taber Abrasion Resistance (1000 Cycles, 1000 g, H-18 Wheel) | 48.0 | mg | ASTM D1044 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength 3 | 137 | kN/m | ASTM D624 |
| Compression Set (25°C, 22 hr) | 40 | % | ASTM D395 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 129 | °C | ASTM D1525 |
| CLTE - Flow | 1.5E-4 | cm/cm/°C | ASTM E831 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength | 15 | kV/mm | ASTM D149 |
| Dielectric Constant (60 Hz) | 5.20 | ASTM D150 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 193 to 210 | °C |
| Note Message | |
|---|---|
| 1 . | 4 in disk |
| 2 . | Flame bar |
| 3 . | Die C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHNYL® A 208F BLACK 21 N | Solvay Engineering Plastics | Nylon 66 | TECHNYL® A |
| Telcar® TL-1025-85 | Teknor Apex Company | TPE | Telcar® |
| TAIRILAC AG12AJ | Formosa Plastics Corporation | ABS | TAIRILAC |
| VITAMIDE® AR13 | A. Schulman Europe | Nylon 66 | VITAMIDE® |
| ENVIROLOY® ENV15-NC310 | ENVIROPLAS®, Inc. | PC+ABS | ENVIROLOY® |
