Order Products : sales@su-jiao.com

NuSil CF2-3521-2

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	LkcIOb_NuSil-CF2-3521-2.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections. Fuel Resistance Static Dissipation and Electrically Conductive Silicones Ice-Phobic Coatings General Purpose: Adhesives and Sealants Comment: Fuel Resistance

Message

The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections.

Fuel Resistance

Static Dissipation and Electrically Conductive Silicones

Ice-Phobic Coatings

General Purpose: Adhesives and Sealants

Comment: Fuel Resistance

General Information
Features	Electrically Conductive Fuel Resistant
Uses	Adhesives Aircraft Applications Electrical/Electronic Applications Sealants

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 1.0
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum
Operating Temperature	-50 to 200	°C

Uncured Properties	Nominal Value	Unit
Color	Black
Density	1.28	g/cm³
Curing Time (23°C)	48	hr
Pot Life	60	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	35
Lap Shear Strength ¹	2.41	MPa
Tensile Strength	4.14	MPa
Tensile Elongation at Break	270	%

Note Message
1 .	Primed with CF1-135

Resin Grade	Manufacturer	Category	Trademark
Rotec® PC 7015	ROMIRA GmbH	PC	Rotec® PC
UMG ABS® VP800	UMG ABS, Ltd.	ABS	UMG ABS®
POLYfill PPH GF5015 PD2	Polykemi AB	PP Homopolymer	POLYfill
Dow Corning® QP1-30	Dow Corning Corporation	Silicone	Dow Corning®
LEXAN™ EXL9330 resin	SABIC Innovative Plastics	PC	LEXAN™