Order Products : sales@su-jiao.com

TECASON™ S

Category:	PSU , Polysulfone
Manufacturer:	Ensinger Inc.
Trademark:	TECASON™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Lkc8kM_TECASON-S.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

TECASON™S is a transparent engineering plastic known for its chemical resistance, rigidity, high-temperature performance, and its ability to operate in an autoclave environment. TECASON™S is FDA and NSF compliant and holds its excellent mechanical properties over a wide range of temperatures.

TECASON™S' unique combination of chemical and hydrolytic resistance, hightemperature performance, good mechanical properties, and agency approvals make it an excellent choice for applications in the pharmaceutical, medical, food service equipment, semiconductor processing, and electronic equipment industries.

General Information
Features	Flame Retardant Food Contact Acceptable Good Chemical Resistance Good Creep Resistance Good Electrical Properties High Clarity High Heat Resistance High Rigidity High Strength Hydrolytically Stable
Uses	Electrical/Electronic Applications Food Service Applications Medical/Healthcare Applications Pharmaceuticals
Agency Ratings	FDA Unspecified Rating NSF Unspecified Rating
Appearance	Clear/Transparent
Forms	Shapes

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.24	g/cm³	ASTM D792
Water Absorption (23°C, 24 hr)	0.30	%	ASTM D570

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)	120		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (23°C)	2480	MPa	ASTM D638
Tensile Strength (Break, 23°C)	70.3	MPa	ASTM D638
Tensile Elongation (Break, 23°C)	50 to 100	%	ASTM D638
Flexural Modulus (23°C)	2690	MPa	ASTM D790
Flexural Strength (23°C)	106	MPa	ASTM D790
Coefficient of Friction ¹(vs. Itself - Dynamic)	0.37

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	69	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
0.45 MPa, Unannealed	181	°C
1.8 MPa, Unannealed	174	°C
CLTE - Flow	5.6E-5	cm/cm/°C	ASTM D696
Maximum Service Temperature
Long Term	141	°C
Short Term	171	°C

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity (23°C)	5.0E+16	ohms·cm	ASTM D257
Dielectric Strength	17	kV/mm	ASTM D149
Dielectric Constant ²(23°C, 60 Hz)	3.10		ASTM D150
Dissipation Factor (23°C, 60 Hz)	1.0E-3		ASTM D150

Note Message
1 .	40 psi, 50 fpm
2 .	50% RH

Resin Grade	Manufacturer	Category	Trademark
RODRUN LC-5040G	UNITIKA Plastics Division	LCP	RODRUN
Starex NH-1904	SAMSUNG SDI CO., LTD.	PS (HIPS)	Starex
Moplen EP648N	LyondellBasell Industries	PP Impact Copolymer	Moplen
Versaflex™ FFC 2882-87	PolyOne Corporation	TPE	Versaflex™
Colorite 66 Series 8566	Colorite Polymers	PVC, Unspecified	Colorite 66 Series