Order Products : sales@su-jiao.com
CERTENE™ PHM-20
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LkWPS0_CERTENEPHM20.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PHM-20 is a certified prime grade Polypropylene designed for injection molding of thin-walled lightweight articles. PHM-20 combines good balance of medium-high flow processability with good tensile strength, high stiffness, good LTHS, short cycling, and excellent ESCR. PHM-20 applications include lightweight containers, medical ware, caps and closures, and housewares. PHM-20 recommended processing temperature is between 220° to 240°C with mold at 20°-50°C. PHM-20 complies with FDA regulation 21CFR 177.1520 and with most international regulations concerning the use of Polypropylene in contact with food. Specific certificates are available upon request. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.905 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 20 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 94 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Injection Molded) | 36.5 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield, Injection Molded) | 8.0 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3(Injection Molded) | 1650 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 27 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Injection Molded) | 106 | °C | ASTM D648 |
| Vicat Softening Temperature | 152 | °C | ASTM D1525 |
| Additional Information |
|---|
| All specimens were injection molded according to ASTM D2146 Type 1. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 104 - 116 | °C | |
| Mold Temperature | -6.67 - 10.0 | °C |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 4406 | RTP Company | Nylon, Unspecified | RTP |
| Nanjing Hongrui PA6 B860 | Nanjing Hongrui Engineering Plastics Co., Ltd. | Nylon 6 | Nanjing Hongrui PA6 |
| Adell Polyamide AL-38 | Adell Plastics, Inc. | Nylon 66 | Adell Polyamide |
| GERMAMID 6 EX | Kunststoff-Kontor-Hamburg GmbH | Nylon 6 | GERMAMID |
| ENVIROLEX™ ENV36-NC890 | ENVIROPLAS®, Inc. | PC+PET | ENVIROLEX™ |
