Order Products : sales@su-jiao.com
HANWHA CTBA-8720BK
| Category: | Polyolefin, Unspecified , Polyolefin |
| Manufacturer: | Hanwha Chemical |
| Trademark: | HANWHA |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LghAmq_HANWHA-CTBA-8720BK.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| HANWHA Wire and Cable Compound CTBA-8720BK is a semiconductive compound for conductor shielding and bonded insulation shielding of high voltage polyethylene insulated cable. HANWHA Wire and Cable Compound CTBA-8720BK has an excellent scorch stability, so it is used for the Triple coextrusion head. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.13 | g/cm³ | ASTM D1505 |
| Degree of Crosslinking | 75 | % | ASTM D2765A |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile strength retention- 7 days (136°C) | > 85 | % | ASTM D638 |
| Elongation retention rate- 7 days (136°C) | > 85.0 | ASTM D638 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 58 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 17.2 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 250 | % | ASTM D638 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (136°C, 168 hr) | < -15 | % | ASTM D573 |
| Change in Ultimate Elongation in Air (136°C, 168 hr) | < -15 | % | ASTM D573 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -40.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | ASTM D257 | ||
| 23°C | < 2.0E+2 | ohms·cm | ASTM D257 |
| 60°C | < 5.0E+2 | ohms·cm | ASTM D257 |
| 90°C | < 1.0E+3 | ohms·cm | ASTM D257 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 100 - 130 | °C |
| Extrusion instructions |
|---|
| Cure Temperature : 320~390°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Reon 67GER01 | Reliance Industries Limited | PVC Homopolymer | Reon |
| ADENE OTJB | A.D. Compound spa | PP Homopolymer | ADENE |
| ASTALAC™ ABS ARF | Marplex Australia Pty. Ltd. | ABS | ASTALAC™ |
| Ferro PP NPP00GE07NA | Ferro Corporation | PP Copolymer | Ferro PP |
| CYCOLAC™ MG47 resin | SABIC Innovative Plastics | ABS | CYCOLAC™ |
