Order Products : sales@su-jiao.com
ICORENE® 3550
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | ICO Polymers NA, A Division of A. Schulman |
| Trademark: | ICORENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LgRk29_ICORENE-3550.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
General purpose linear low density polyethylene compund offering quick cycles and part to part consistancy. Available as pellet or powder. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 0.932 - 0.937 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | < 5.0 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (100% Igepal, Compression Molded, F50) | > 1000 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield, Rotational Molded) | 13.8 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 20 | % | ASTM D638 |
| Flexural Modulus - 1% Secant (Rotational Molded) | 600 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Impact Strength (-40°C, 3.18 mm, Rotational Molded) | 77 | J | ARM |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Rotational Molded) | 55.0 | °C | ASTM D648 |
| Additional Information |
|---|
| Test data for natural, unpigmented resin. |
| Note Message | |
|---|---|
| 1 . | Compression Molded |
| 2 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PONYL 4001G15 | POLYROCKS CHEMICAL CO., LTD | Nylon 66 | PONYL |
| Retpol® PDR 7380/2 UV3 | PolyPacific Pty. Ltd. | PP, Unspecified | Retpol® |
| TPUCO® TPU-C85 | Taiwan PU Corporation | TPU-Polyester | TPUCO® |
| ASTALAC™ ABS MGP22 | Marplex Australia Pty. Ltd. | ABS | ASTALAC™ |
| Dryflex® V 45D101 | ELASTO | TPV | Dryflex® |
