Ebalta SG 140 / PUR 12

Category: PUR, Unspecified , Polyurethane
Manufacturer: Ebalta Kunststoff GmbH
Trademark: Ebalta
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: LgA2Wl_Ebalta-SG-140-PUR-12.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
This is a Polyurethane system.
Material should be carefully stirred up/ shaked before use.
Filler content and sales units are on the separate mixing table noted.

Applications
  • Pattern plates
  • Foundry patterns
  • Core boxes
  • Control castings
  • Coping models
  • Negatives
  • Prototypes
  • Mould probes for trimming of prototypes

Properties
  • high strength
  • unfilled
General Information
Features
  • Fast Cure
  • High Strength
Uses
  • Prototyping
Appearance
  • Beige
Processing Method
  • Casting
HardnessNominal ValueTest Method
Shore Hardness (Shore D)69 to 75ISO 7619
MechanicalNominal ValueUnitTest Method
Flexural Modulus 1270 to 1430MPaISO 178
Flexural Stress 40.0 to 50.0MPaISO 178
Compressive Stress 30.0 to 40.0MPaISO 604
ImpactNominal ValueUnitTest Method
Charpy Unnotched Impact Strength 12 to 18kJ/m²ISO 179
ThermalNominal ValueUnitTest Method
Martens Temperature 43 to 47°CDIN 53458
ThermosetNominal ValueUnit
Thermoset Components
    Hardener Mix Ratio by Volume: 91 Mix Ratio by Weight: 100
    Resin Mix Ratio by Weight: 100 Mix Ratio by Volume: 100
Uncured PropertiesNominal ValueUnit
Density (20°C)1.03 to 1.07g/cm³
Viscosity (25°C)0.060 to 0.080Pa·s
Curing Time (20°C)0.50 to 1.0hr
Pot Life 1(20°C)4.0 to 5.0min
Note Message
1 .200 g
Resin Grade Manufacturer Category Trademark
RTP 901 UV RTP Company PSU RTP
Andur AL 80-5 AP-FP/Curene® 110 Anderson Development Company PUR-Eth,aliphat Andur
Fortron® 0320 Celanese Corporation PPS Fortron®
Lucent PP TPP-217Q Lucent Polymers, Inc. PP, Unspecified Lucent PP
Plaskon SMT-B-1N Cookson Electronics - Semiconductor Products Epoxy Plaskon