Order Products : sales@su-jiao.com

3M™ Dyneon™ Fluoroelastomer FE 5623

Category:	Fluorelastomer , Fluoroelastomer
Manufacturer:	3M Advanced Materials Division
Trademark:	3M™ Dyneon™ Fluoroelastomer
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Lcg9tb_3MDyneonFluoroelastomerFE5623.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
3M™ Dyneon™ Fluoroelastomer FE 5623 is a dipolymer made from hexafluoropropylene and vinylidene fluoride. FE 5623 has an incorporated bisphenol cure system. Special Features Composition: dipolymer of vinylidene fluoride and hexafluoropropylene Process targets: injection and transfer moulding, extrusion and calendering Proprietary incorporated cure technology Improved cure technology resulting in more consistent part size from successive moulding cycles Faster curing version of 3M™ Dyneon™ Fluoroelastomer FE 5620Q Improved scorch resistance at high moulding temperatures Excellent mould release - can be used in automated injection moulding equipment Clean running Compounds prepared from Dyneon FE 5623 can be formulated to meet Mil-R-83248 Typical Applications 3M™ Dyneon™ Fluoroelastomer FE 5623 is suitable for usage in injection moulding (e.g. production of O-rings) and extrusion applications.

Message

3M™ Dyneon™ Fluoroelastomer FE 5623 is a dipolymer made from hexafluoropropylene and vinylidene fluoride. FE 5623 has an incorporated bisphenol cure system.

Special Features

Composition: dipolymer of vinylidene fluoride and hexafluoropropylene

Process targets: injection and transfer moulding, extrusion and calendering

Proprietary incorporated cure technology

Improved cure technology resulting in more consistent part size from successive moulding cycles

Faster curing version of 3M™ Dyneon™ Fluoroelastomer FE 5620Q

Improved scorch resistance at high moulding temperatures

Excellent mould release - can be used in automated injection moulding equipment

Clean running

Compounds prepared from Dyneon FE 5623 can be formulated to meet Mil-R-83248

Typical Applications
3M™ Dyneon™ Fluoroelastomer FE 5623 is suitable for usage in injection moulding (e.g. production of O-rings) and extrusion applications.

General Information
Features	Good demoulding performance
Uses	O-rings
Agency Ratings	MIL R-83248
Appearance	Opacity White-like
Forms	Thick sheet
Processing Method	Extrusion Resin transfer molding Calendering Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.80	g/cm³	Internal method
Mooney Viscosity (ML 1+10, 121°C)	24	MU	Internal method
Fluorine Content	66	%	Internal method

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	78		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹(100% Strain)	6.50	MPa	ASTM D412A
Tensile Strength ²	15.0	MPa	ASTM D412A
Tensile Elongation ³(Break)	190	%	ASTM D412A
Compression Set			ASTM D1414
200°C, 70 hr ⁴	19	%	ASTM D1414
200°C, 70 hr ⁵	18	%	ASTM D1414

Note Message
1 .	D mould
2 .	Die D
3 .	D mould
4 .	Post cured 16 hours @ 230°C
5 .	Post cured 24 hours @ 260°C

Resin Grade	Manufacturer	Category	Trademark
RTP 4607 FR	RTP Company	SPS	RTP
RTP 103 TFE 15 HS	RTP Company	PP, Unspecified	RTP
Shanghai Potomer SG5	Shanghai Potomer International Trade Co., Ltd.	PVC, Rigid	Shanghai Potomer
SPESIN® KP213G30	Kolon Plastics, Inc.	PBT	SPESIN®
Petlon R-Prime A2-G50-00-NT	Petlon Polymers Ltd	Nylon 6	Petlon R-Prime