Order Products : sales@su-jiao.com
CERTENE™ HWB-1048
| Category: | HDPE, HMW , High Density (HMW) Polyethylene |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LXlt95_CERTENE-HWB-1048.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
HWB-1048 is a certified prime grade High Molecular Weight polyethylene copolymer developed for BLOW MOLDING and THERMOFORMING of high performance large size industrial parts. HWB-1048 features good processability, good melt strength and rigidity, excellent combination of low temperature Impact strength, and chemical resistance. HWB-1048 applications include 55-gallon shipping containers, chemical and fuel tanks, carrying cases, automotive parts, tool boxes, truck-bed liners, and playground equipment. HWB-1048 recommended processing temperature is 190 to 210°C. HWB-1048 complies with FDA regulation 21CFR 177.1520(c) 3.1a + 3.2a (conditions of use B through H) and with most international regulations concerning the use of Polyethylene in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.948 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | < 0.10 | g/10 min | |
| 190°C/21.6 kg 1 | 10 | g/10 min | |
| Environmental Stress-Cracking Resistance | ASTM D1693B | ||
| 10% Igepal, Compression Molded, F50 | > 600 | hr | |
| 100% Igepal, Compression Molded, F50 | > 600 | hr |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield, Compression Molded) | 24.8 | MPa | ASTM D638 |
| Tensile Elongation 3(Break, Compression Molded) | 700 | % | ASTM D638 |
| Flexural Modulus 4(Compression Molded) | 1210 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Impact Strength 5(23°C, Compression Molded) | 252 | kJ/m² | ASTM D1822 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 78.0 | °C | ASTM D648 |
| Brittleness Temperature | < -75.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 126 | °C | ASTM D1525 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Processing Temperature | 190 to 210 | °C |
| Note Message | |
|---|---|
| 1 . | High Load |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| 4 . | 13 mm/min |
| 5 . | 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Polymer-E EV302 | Asia Polymer Corporation (APC) | EVA | Polymer-E |
| Ferro PP NPP00GDV04WH | Ferro Corporation | PP Homopolymer | Ferro PP |
| Hyundai EP Adhesives HB520/1002 | HYUNDAI EP Co., Ltd. | PE, Unspecified | Hyundai EP Adhesives |
| Oleflex™ 6260-70A; 815179H | Vi-Chem Corporation | TPE | Oleflex™ |
| POLYCASA® XT 630 | Polycasa | Acrylic (PMMA) | POLYCASA® |
