Order Products : sales@su-jiao.com
Akulon® F150-CZ
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | DSM Engineering Plastics |
| Trademark: | Akulon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LWv3E2_Akulon-F150-CZ.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Akulon® F150-CZ is a Polyamide 6 (Nylon 6) material. It is available in Europe. Important attributes of Akulon® F150-CZ are:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Multi-Point Data |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.13 | -- | g/cm³ | ISO 1183 |
| Water Absorption | ISO 62 | |||
| Saturation, 23°C | 9.5 | -- | % | |
| Equilibrium, 23°C, 50% RH | 2.5 | -- | % | |
| Viscosity Number | 370 | -- | cm³/g | ISO 307 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 3200 | -- | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 85.0 | -- | MPa | ISO 527-2 |
| Tensile Strain (Yield) | 4.0 | -- | % | ISO 527-2 |
| Nominal Tensile Strain at Break | > 50 | -- | % | ISO 527-2 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Melting Temperature 1 | 220 | -- | °C | ISO 11357-3 |
| CLTE - Flow | 1.0E-4 | -- | cm/cm/°C | ISO 11359-2 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | -- | 1.0E+15 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+15 | -- | ohms·cm | IEC 60093 |
| Electric Strength | 25 | -- | kV/mm | IEC 60243-1 |
| Relative Permittivity | IEC 60250 | |||
| 100 Hz | 3.40 | -- | ||
| 1 MHz | 3.10 | -- | ||
| Dissipation Factor | IEC 60250 | |||
| 100 Hz | 6.5E-3 | -- | ||
| 1 MHz | 0.017 | -- |
| Note Message | |
|---|---|
| 1 . | 10°C/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Polytron® P30N03 | Polyram Ram-On Industries | PP Copolymer | Polytron® |
| XANTAR® FC 25 R | Mitsubishi Engineering-Plastics Corp | PC | XANTAR® |
| Grivory® HT1V-5 FWA nat | EMS-GRIVORY | Nylon 6I/6T | Grivory® |
| LOXIM 100 00 V2 | LOXIM Industries Private Limited | PC | LOXIM |
| Edgetek™ MP-20GF/000 BLK | PolyOne Corporation | PPE+PS | Edgetek™ |
