Order Products : sales@su-jiao.com
Parylene HT®
| Category: | PPX , Polyparaxylylene |
| Manufacturer: | Specialty Coating Systems (SCS) |
| Trademark: | Parylene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LVnWUk_Parylene-HT-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Parylene is the name for members of a unique polymer series. The basic member of the series, Parylene N, is poly(para-Xylylene), a completely linear, highly crystalline material. Parylene HT, the newest commercially available Parylene, replaces the alpha hydrogen atoms of the N dimer with fluorine. This variant of Parylene is useful in high temperature applications (short-term up to 450°C) and those in which long-term UV stability is required. Parylene HT also has the lowest coefficient of friction and dielectric constant, and the highest penetrating ability of the four variants. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.32 | g/cm³ | ASTM D1505 |
| Water Absorption (24 hr) | < 0.010 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 122 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Coefficient of Friction | ASTM D1894 | ||
| Dynamic | 0.13 | ||
| Static | 0.15 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Secant Modulus - MD | 2550 | MPa | ASTM D5026 |
| Tensile Strength - MD | ASTM D882 | ||
| Yield | 34.5 | MPa | |
| Break | 51.7 | MPa | |
| Tensile Elongation - MD | ASTM D882 | ||
| Yield | 2.0 | % | |
| Break | < 200 | % | |
| Oxygen Permeability (25°C) | 24 | cm³·mm/m²/atm/24 hr | ASTM D1434 |
| Water Vapor Transmission Rate (38°C, 100% RH) | 0.22 | g·mm/m²/atm/24 hr | ASTM F1249 |
| Carbon Dioxide Permeability (25°C) | 95 | cm³·mm/m²/atm/24 hr | ASTM D1434 |
| Nitrogen Permeability (25°C) | 4.8 | cm³·mm/m²/atm/24 hr | ASTM D1434 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Service Temperature - Short-Term | 450 | °C | |
| Continuous Use Temperature | 350 | °C | |
| Melting Temperature | > 500 | °C | DSC |
| CLTE - Flow (25°C) | 3.6E-5 | cm/cm/°C | TMA |
| Specific Heat (20°C) | 1040 | J/kg/°C | |
| Thermal Conductivity (25°C) | 0.096 | W/m/K | ASTM D1461 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity 1 | 5.0E+15 | ohms | ASTM D257 |
| Volume Resistivity 2(23°C) | 2.0E+17 | ohms·cm | ASTM D257 |
| Dielectric Strength | 210 | kV/mm | ASTM D149 |
| Dielectric Constant | ASTM D150 | ||
| 60 Hz | 2.21 | ||
| 1 kHz | 2.20 | ||
| 1 MHz | 2.17 | ||
| Dissipation Factor | ASTM D150 | ||
| 60 Hz | < 2.0E-4 | ||
| 1 kHz | 2.0E-3 | ||
| 1 MHz | 1.0E-3 |
| Optical | Nominal Value | Test Method | |
|---|---|---|---|
| Refractive Index | 1.559 | ASTM D542 |
| Note Message | |
|---|---|
| 1 . | 23°C, 50% RH |
| 2 . | 50% RH |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Salflex 805C | Salflex Polymers Ltd. | PP Copolymer | Salflex |
| SAXAMID™ 226F6RY01 | SAX Polymers | Nylon 66 | SAXAMID™ |
| SILVER® PP 423MT | Guangdong Silver Age Sci & Tech. Co., Ltd | PP, Unspecified | SILVER® |
| Jiangsu Sinarise JM8511 | Jiangsu Sinarise New Material Technology Co., Ltd | TPE | Jiangsu Sinarise |
| WELLAMID Nylon 6600 GV 30 WWCP | CP-Polymer-Technik GmbH & Co. KG | Nylon 66 | WELLAMID Nylon |
