Order Products : sales@su-jiao.com
Akulon® K125
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | DSM Engineering Plastics |
| Trademark: | Akulon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LTNOgQ_Akulon-K125.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Akulon® K125 is a Polyamide 6 (Nylon 6) material. It is available in Europe. Primary attribute of Akulon® K125: Low Viscosity. |
| General Information | |
|---|---|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.13 | g/cm³ | ISO 1183 |
| Water Absorption | ISO 62 | ||
| Saturation, 23°C | 9.5 | % | |
| Equilibrium, 23°C, 50% RH | 2.5 | % | |
| Viscosity Number | 152 | cm³/g | ISO 307 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 220 | °C | ISO 11357-3 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 4.0 to 8.0 | hr | |
| Rear Temperature | 230 to 235 | °C | |
| Middle Temperature | 235 to 250 | °C | |
| Front Temperature | 240 to 260 | °C | |
| Nozzle Temperature | 240 to 270 | °C | |
| Processing (Melt) Temp | 240 to 275 | °C | |
| Mold Temperature | 50.0 to 80.0 | °C | |
| Injection Rate | Moderate-Fast | ||
| Back Pressure | 3.00 to 10.0 | MPa | |
| Screw Compression Ratio | 2.5:1.0 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Zytel® 158L NC010 | DuPont Performance Polymers | Nylon 612 | Zytel® |
| Daelim Po1y® LD-26A | DAELIM INDUSTRIAL CO., LTD. | LDPE | Daelim Po1y® |
| Daplen™ EE108U | Borealis AG | PP, Unspecified | Daplen™ |
| HANWHA LLDPE 3325W | Hanwha Chemical | LLDPE | HANWHA LLDPE |
| Sylvin 8225-90FUV Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
