Order Products : sales@su-jiao.com
PELPRENE™ P46D-01
| Category: | TPEE , Thermoplastic Polyester Elastomer |
| Manufacturer: | TOYOBO America, Inc. |
| Trademark: | PELPRENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LMMPO7_PELPRENE-P46D-01.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
PELPRENE™P46D-01 is a thermoplastic polyester elastomer (TPEE) product,. It is available in North America. Features include:
|
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.15 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 0.50 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (2.00 mm) | 0.70 | % | ASTM D955 |
| Water Absorption (Equilibrium, 23°C, 65% RH) | 0.45 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 46 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 31.9 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 700 | % | ASTM D638 |
| Flexural Modulus | 110 | MPa | ASTM D790 |
| Compressive Modulus | 9.60 | MPa | ASTM D695 |
| Taber Abrasion Resistance (1000 Cycles) | 10.0 | mg | ASTM D1044 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 165 | kN/m | ASTM D624 |
| Compression Set | 55 | % | ASTM D395 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 74.0 | °C | ASTM D648 |
| Brittleness Temperature | -65.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 153 | °C | ASTM D1525 |
| Melting Temperature | 203 | °C | DSC |
| CLTE - Flow | 1.7E-4 | cm/cm/°C | ASTM D696 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 4.0E+13 | ohms·cm | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Additional Information |
|---|
| Hardness, JIS K6301, A scale: 97Resilience, JIS K6301: 70 %Dielectric Strength, JIS K2111: 25 MV/mThe value listed as Compression Set, ASTM D395 was tested according to the JIS K6301 standard.The value listed as Brittle Point, ASTM D746 was tested according to the JIS K6301 standard.Coefficient of Linear Thermal Expansion, TMA: 17e-5 1/KCompression Modulus, ASTM D695, 10%: 9.6 MPaTensile Modulus, ASTM D638, 50% Modulus: 15.2 MPaThe value listed as Brittle Temp ASTM D746, was tested in accordance with JIS K6301. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEREZ PC X 9005 GF 5 | TER HELL PLASTIC GMBH | PC | TEREZ PC |
| Elastron® V P.V101.A40.B | Elastron USA, Inc. | TPV | Elastron® V |
| LG PMMA ID187 | LG MMA Corp. | Acrylic (PMMA) | LG PMMA |
| TECHNYL® C 216 V45 BLACK 34N | Solvay Engineering Plastics | Nylon 6 | TECHNYL® |
| Sylvin 8816-75 GREY 9341 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
