Order Products : sales@su-jiao.com
Synres-Almoco EP 3572
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Synres-Almoco BV |
| Trademark: | Synres-Almoco |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LKp5v3_Synres-Almoco-EP-3572.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Glass-fibre reinforced epoxy moulding compound Good mechanical and electrical strength, enhanced elasticity for ensuring good sealing under extreme heat and/or humidity, good chemical resistance, exceptional metal adhesion, very good flame retardance. Suitable for pelleting and preheating Primary application(s): Embedding metal parts for metallurgical tests This product meets the allowed upper limits for heavy metals and PCAs and also conforms to the requirements of the EU directives 2002/95 (RoHS), 2002/96 (WEEE) and 2006/122 (PFOS) |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 2.10 to 2.20 | g/cm³ | ISO 1183 |
| Apparent Density | 1.00 to 1.15 | g/cm³ | ISO 60 |
| Molding Shrinkage - Flow | 0.25 to 0.45 | % | ISO 2577 |
| Water Absorption (23°C, 24 hr) | < 0.10 | % | ISO 62 |
| Post Shrinkage 1 | < 0.050 | % | ISO 2577 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 15000 to 18000 | MPa | ISO 527-2 |
| Tensile Stress | 50.0 to 70.0 | MPa | ISO 527-2 |
| Flexural Modulus | 11000 to 13000 | MPa | ISO 178 |
| Flexural Stress | 100 to 120 | MPa | ISO 178 |
| Compressive Stress | 150 to 200 | MPa | ISO 604 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 2.0 to 3.0 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | 4.0 to 6.0 | kJ/m² | ISO 179/1eU |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 1.8 MPa, Unannealed | 110 to 130 | °C | ISO 75-2/A |
| 8.0 MPa, Unannealed | 100 to 120 | °C | ISO 75-2/C |
| CLTE - Flow (50 to 150°C) | 1.0E-5 to 4.0E-5 | cm/cm/°C | ISO 11359-2 |
| Thermal Conductivity | 0.50 to 0.70 | W/m/K | ASTM E1461 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+13 to 1.0E+14 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+14 to 1.0E+15 | ohms·cm | IEC 60093 |
| Electric Strength | 15 to 20 | kV/mm | IEC 60243-1 |
| Relative Permittivity | IEC 60250 | ||
| 100 Hz | 6.00 4.00 | ||
| 1 MHz | 6.00 4.00 | ||
| Dissipation Factor | IEC 60250 | ||
| 100 Hz | 0.020 to 0.030 | ||
| 1 MHz | 0.010 to 0.020 | ||
| Arc Resistance | PLC 4 | ASTM D495 | |
| Comparative Tracking Index | > 325 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (0.700 mm, Tested by RASCHIG) | V-0 | UL 94 | |
| Glow Wire Flammability Index | 900 | °C | IEC 60695-2-12 |
| Glow Wire Ignition Temperature | 900 | °C | IEC 60695-2-13 |
| Note Message | |
|---|---|
| 1 . | 168 h / 110°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SAMAT 5003S1 | POLYROCKS CHEMICAL CO., LTD | PP, Unspecified | SAMAT |
| Tectron H2296 | TECTRON Systems Pte Ltd | TPV | Tectron |
| GELAST GT40IT | Guang Sung Plastics (GSPL) | TP, Unspecified | GELAST |
| PETILEN MH 318 | PETKIM Petrokimya Holding A.S. | PP, Unspecified | PETILEN |
| ULTEM™ 2310EPR resin | SABIC Innovative Plastics | PEI | ULTEM™ |
