Order Products : sales@su-jiao.com
Sinpolene MBW1781
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Teknor Apex Asia Pacific PTE. LTD. |
| Trademark: | Sinpolene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LHfGov_Sinpolene-MBW1781.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Sinpolene MBW1781 is a polyethylene-based bluish white masterbatch, designed specifically for use in injection moulding and sheet extrusion of polyolefin. With its high pigment loading, Sinpolene MBW1781 offers high colouring value with excellent quality and performance. The blue undertone of this masterbatch is attributed by specially selected high performance, fine crystal size rutile titanium dioxide. Sinpolene MBW1781 is delivered as free flowing pellets for processing convenience. CHARACTERISTICS * Easy processing * Good dispersion * High opacifying power * Excellent whiteness * Bluish undertone |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.75 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | < 30 | g/10 min | ASTM D1238 |
| Moisture Content | % | ASTM D3030 |
| Additional Information |
|---|
| Recommended dosage: 2 - 8% |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Stanyl® TE250F9 | DSM Engineering Plastics | Nylon 46 | Stanyl® |
| Geon™ Vinyl Flexible MG23B | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Flexible |
| Keliren® CM301 | Hangzhou Keli Chemical Co., Ltd. | CPE | Keliren® |
| PLUSTEK RA325G5 | Polyram Ram-On Industries | Nylon 66 | PLUSTEK |
| Plenco 00714 (Injection) | Plastics Engineering Co. | Mel Phenolic | Plenco |
