Order Products : sales@su-jiao.com

THERMOLAST® K TC7CSZ (Series: CS)

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	KRAIBURG TPE
Trademark:	THERMOLAST® K
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	LHSAaw_THERMOLAST-K-TC7CSZ-Series-CS-.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

The CS Series is your material solution for sealing applications, providing an excellent compression set. The compounds are available in natural and black colors.

Typical applications

Fastenings

Grommets

Membranes

Seals

Material advantages

Adhesion to PP

Easy coloring (compounds in natural colors)

Excellent compression set

Excellent heat stability

General Information
Features	Good Adhesion Good Thermal Stability
Uses	Fasteners Grommets Membranes Seals
Appearance	Black
Processing Method	Extrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	1.10	g/cm³	ISO 1183

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore A)	69		ISO 7619

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹(Yield)	8.00	MPa	ISO 37
Tensile Elongation ²(Break)	500	%	ISO 37
Tear Strength ³	20	kN/m	ISO 34-1
Compression Set ⁴			ISO 815
23°C, 72 hr	16	%
70°C, 24 hr	27	%
100°C, 24 hr	41	%
120°C, 24 hr	73	%

Extrusion	Nominal Value	Unit
Drying Temperature	60.0 to 80.0	°C
Drying Time	2.0 to 4.0	hr
Cylinder Zone 1 Temp.	160	°C
Cylinder Zone 2 Temp.	180	°C
Cylinder Zone 3 Temp.	200	°C
Die Temperature	200 to 230	°C

Note Message
1 .	Type S2, 200 mm/min
2 .	Type S2, 200 mm/min
3 .	Method Bb, Angle (Nicked)
4 .	Method A

Resin Grade	Manufacturer	Category	Trademark
Matrixx 75S5251	The Matrixx Group, Inc.	Nylon 66	Matrixx
SABIC® PP CX04-82	Saudi Basic Industries Corporation (SABIC)	PP, Unspecified	SABIC® PP
SUMIPEX® MH_EXTRA	Sumitomo Chemical Co., Ltd.	Acrylic (PMMA)	SUMIPEX®
NEXUS PP HPP5S	Nexus Resin Group, LLC.	PP Homopolymer	NEXUS PP
InnoTuf® HP-2150A	Innovative Polymers, Inc.	TSU-Ether	InnoTuf®