Order Products : sales@su-jiao.com
THERMOLAST® K TF8WCS (Series: DW/CS)
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | KRAIBURG TPE |
| Trademark: | THERMOLAST® K |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LG40ZT_THERMOLAST-K-TF8WCS-Series-DW-CS-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
The DW/CS Series is your material solution for applications in contact with drinking water as well as excellent compression set. The compounds are approved in accordance with all relevant European drinking water standards - DVGW, W270, KTW, WRAS, ACS. Typical applications
Material advantages
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.930 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 75 | ISO 7619 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(Yield) | 18.0 | MPa | ISO 37 |
| Tensile Elongation 2(Break) | 500 | % | ISO 37 |
| Tear Strength 3 | 22 | kN/m | ISO 34-1 |
| Compression Set 4 | ISO 815 | ||
| 23°C, 72 hr | 14 | % | |
| 70°C, 24 hr | 63 | % |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 60.0 to 80.0 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Cylinder Zone 1 Temp. | 160 | °C | |
| Cylinder Zone 2 Temp. | 180 | °C | |
| Cylinder Zone 3 Temp. | 200 | °C | |
| Die Temperature | 200 to 230 | °C |
| Note Message | |
|---|---|
| 1 . | Type S2, 200 mm/min |
| 2 . | Type S2, 200 mm/min |
| 3 . | Method Bb, Angle (Nicked) |
| 4 . | Method A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tarnoform® 300 GB2 | Grupa Azoty S.A. | Acetal (POM) Copolymer | Tarnoform® |
| BESTNYL SI00VI02BHC | Triesa Plastics | Nylon 6 | BESTNYL |
| En Chuan 6120 | En Chuan Chemical Industries Co,. Ltd. | Polyester, TS | En Chuan |
| LEXAN™ HPXS8R resin | SABIC Innovative Plastics | PC | LEXAN™ |
| 3M™ Dyneon™ PTFE Compound TF 3235 | 3M Advanced Materials Division | PTFE | 3M™ Dyneon™ PTFE Compound |
