Order Products : sales@su-jiao.com
Generic MDPE
| Category: | MDPE , Medium Density Polyethylene |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LFvycG_Generic-MDPE.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic MDPE This information is provided for comparative purposes only. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- | 0.933 - 0.942 | g/cm³ | ASTM D792 |
| 23°C | 0.934 - 0.949 | g/cm³ | ISO 1183 |
| -- | 0.929 - 0.953 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | |||
| 190°C/2.16 kg | 0.040 - 5.4 | g/10 min | ASTM D1238 |
| 190°C/2.16 kg | 0.12 - 4.3 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance (23°C) | 6.00 - 5000 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | |||
| 23°C | 59 - 65 | ASTM D2240 | |
| 23°C | 53 - 62 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | |||
| 23°C | 291 - 1070 | MPa | ASTM D638 |
| 23°C | 698 - 803 | MPa | ISO 527-2 |
| Tensile Strength | |||
| Yield, 23°C | 13.8 - 21.1 | MPa | ASTM D638 |
| Yield, 23°C | 16.6 - 19.4 | MPa | ISO 527-2 |
| Fracture, 23°C | 11.5 - 33.2 | MPa | ASTM D638 |
| Tensile Strain | |||
| Yield, 23°C | 9.0 - 10 | % | ISO 527-2 |
| Fracture, 23°C | 390 - 910 | % | ASTM D638 |
| Fracture, 23°C | 330 - 800 | % | ISO 527-2 |
| Flexural Modulus | |||
| 23°C | 474 - 852 | MPa | ASTM D790 |
| 23°C | 588 - 900 | MPa | ISO 178 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 13 - 63 | µm | |
| secant modulus | ASTM D882 | ||
| MD | 145 - 811 | MPa | ASTM D882 |
| TD | 155 - 1290 | MPa | ASTM D882 |
| Tensile Strength | |||
| MD : Yield | 12.4 - 21.4 | MPa | ASTM D882 |
| TD : Yield | 19.1 - 23.3 | MPa | ASTM D882 |
| Yield, 23°C | 14.3 - 24.0 | MPa | ISO 527-3 |
| MD : Fracture | 23.4 - 57.6 | MPa | ASTM D882 |
| TD : Fracture | 18.0 - 48.3 | MPa | ASTM D882 |
| Fracture, 23°C | 26.0 - 65.8 | MPa | ISO 527-3 |
| 23°C | 47.4 - 57.8 | MPa | ISO 527-3 |
| Tensile Elongation | |||
| MD : Fracture | 290 - 900 | % | ASTM D882 |
| TD : Fracture | 590 - 900 | % | ASTM D882 |
| Fracture, 23°C | 450 - 710 | % | ISO 527-3 |
| Dart Drop Impact | |||
| 23°C | 50 - 170 | g | ASTM D1709 |
| 23°C | 95 - 230 | g | ISO 7765-1 |
| Elmendorf Tear Strength | |||
| MD | 10 - 57 | g | ASTM D1922 |
| TD | 40 - 1900 | g | ASTM D1922 |
| -- | 0.20 - 5.8 | N | ISO 6383-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 76 - 650 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 57.6 - 64.0 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 41.0 - 42.0 | °C | ASTM D648 |
| Brittleness Temperature | -100 - -69.1 | °C | ASTM D746 |
| Vicat Softening Temperature | |||
| -- | 114 - 126 | °C | ASTM D1525 |
| -- | 112 - 124 | °C | ISO 306 |
| Melting Temperature | |||
| -- | 125 - 127 | °C | |
| -- | 125 - 128 | °C | ASTM D3418 |
| -- | 123 - 127 | °C | ISO 3146 |
| CLTE - Flow | 1.0E-4 - 2.8E-4 | cm/cm/°C | ASTM D696 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss | 5 - 90 | ASTM D2457 | |
| Haze | 6.2 - 10 | % | ASTM D1003 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 140 - 205 | °C | |
| Cylinder Zone 2 Temp. | 160 - 205 | °C | |
| Cylinder Zone 3 Temp. | 174 - 205 | °C | |
| Cylinder Zone 4 Temp. | 195 - 205 | °C | |
| Cylinder Zone 5 Temp. | 194 - 205 | °C | |
| Melt Temperature | 195 - 214 | °C | |
| Die Temperature | 199 - 211 | °C |
| Extrusion instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic MDPEThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCANTEC PC S75R GF30 | Polykemi AB | PC | SCANTEC |
| SolVin 372HA | INOVYN | PVC, Unspecified | SolVin |
| Moplen HP461Y | PolyMirae | PP, Unspecified | Moplen |
| Ecobarrier® 0916LX | Noble Polymers | Polyolefin, Unspecified | Ecobarrier® |
| Durethan® B 40 SK 000000 | LANXESS Corporation | Nylon 6 | Durethan® |
