Order Products : sales@su-jiao.com

VICOTE® 705 Blue

Category:	PEEK , Polyetheretherketone
Manufacturer:	Victrex plc
Trademark:	VICOTE®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	LFkFtB_VICOTE-705-Blue.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
VICOTE 705 Blue is a blue pigmented version of the VICOTE 705 grade and contains additives to help with adhesion, wetting of the substrate and shrinkage. This grade has a nominal particle size of ~ 50 microns. The powder is light blue in colour and is a low melt viscosity grade for lower film builds. Typical film thicknesses range from 50 - 80 microns. The final coating takes on a mid blue colour after stoving. The VICTREX® PEEK polymer contained in the VICOTE powder coatings are thermoplastic in nature and exhibits flow above the melt temperature. When processed using the correct guidelines the coatings will exhibit the excellent properties that VICTREX PEEK polymer is renowned for. Typical properties are high continuous use temperature of 260°C, excellent wear, abrasion and cut through resistance at these high temperatures combined with excellent chemical and radiation resistance. VICOTE Coatings have a low level of extractables and are hydrolysis resistant and inherently flame retardant.

Message

VICOTE 705 Blue is a blue pigmented version of the VICOTE 705 grade and contains additives to help with adhesion, wetting of the substrate and shrinkage. This grade has a nominal particle size of ~ 50 microns. The powder is light blue in colour and is a low melt viscosity grade for lower film builds. Typical film thicknesses range from 50 - 80 microns. The final coating takes on a mid blue colour after stoving.

The VICTREX® PEEK polymer contained in the VICOTE powder coatings are thermoplastic in nature and exhibits flow above the melt temperature. When processed using the correct guidelines the coatings will exhibit the excellent properties that VICTREX PEEK polymer is renowned for.

Typical properties are high continuous use temperature of 260°C, excellent wear, abrasion and cut through resistance at these high temperatures combined with excellent chemical and radiation resistance. VICOTE Coatings have a low level of extractables and are hydrolysis resistant and inherently flame retardant.

General Information
Additive	Unspecified Additive
Features	Flame Retardant Good Abrasion Resistance Good Chemical Resistance Good Wear Resistance Hydrolysis Resistant Low Extractables Low Viscosity Radiation (Gamma) Resistant
Uses	Coating Applications
Agency Ratings	FDA 21 CFR 175.300
Appearance	Blue
Processing Method	Coating Electrostatic Spray Coating

Physical	Nominal Value	Unit	Test Method
Density	1.32	g/cm³	ISO 1183
Particle Size	50.0	µm

Additional Information	Nominal Value	Unit	Test Method
Konig Hardness	3.0	min	ISO 1522

Thermal	Nominal Value	Unit	Test Method
Continuous Use Temperature	260	°C	ASTM D794
Glass Transition Temperature	143	°C	DSC
Melting Temperature	343	°C	DSC
RTI Elec	260	°C	UL 746
RTI Imp	260	°C	UL 746
RTI Str	260	°C	UL 746

Resin Grade	Manufacturer	Category	Trademark
Witcom PC/ABS 3S-FR	Witcom Engineering Plastics B.V.	PC+ABS	Witcom PC/ABS
New-prene™ 9265N	Total Polymer Vision (Suzhou) Co., LTD	PP+EPDM	New-prene™
Bergamid™ A70 MI40 H NC017	PolyOne Corporation	Nylon 66	Bergamid™
Boda BDF30P	Chenguang Fluoro & Silicone Elastomers Co., Ltd.	Fluorelastomer	Boda
AMTOPP BFP40	Inteplast Group	PP, Unspecified	AMTOPP