Order Products : sales@su-jiao.com
Magnobond 3347
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Magnolia Plastics, Inc. |
| Trademark: | Magnobond |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LEv5Gl_Magnobond-3347.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Magnobond 3347 is an Epoxy; Epoxide (Epoxy) product. It is available in North America. Typical application: Electrical/Electronic Applications. Primary characteristic: low viscosity. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.15 | g/cm³ | ASTM D792 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 6.8E+16 | ohms | ASTM D257 |
| Volume Resistivity | 3.3E+16 | ohms·cm | ASTM D257 |
| Dielectric Constant (1 kHz) | 2.83 | ASTM D150 | |
| Dissipation Factor | ASTM D150 | ||
| 1 kHz | 4.0E-3 | ||
| 1 MHz | 0.015 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Pot Life (52°C) | 22 | min | |
| Thermoset Mix Viscosity | 500 | cP | ASTM D2393 |
| Demold Time (130°C) | 120 to 240 | min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TAROMID B 280 Y0 | Taro Plast S.p.A. | Nylon 6 | TAROMID B |
| Vistalon™ 722 | ExxonMobil Chemical | EPM | Vistalon™ |
| Cheng Yu T883GV25 | Cheng Yu Plastic Company Limited | PBT | Cheng Yu |
| Geon™ Vinyl Rigid Extrusion 87554 | PolyOne Corporation | PVC, Rigid | Geon™ Vinyl Rigid Extrusion |
| Plenco 07579 (Injection) | Plastics Engineering Co. | Phenolic | Plenco |
