Order Products : sales@su-jiao.com
RTP 207.3F
| Category: | Nylon 12 , Polyamide 12 |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LBF3GL_RTP-207-3F.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.37 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm, Injection Molded) | 0.20 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 8610 | MPa | ASTM D638 |
| Tensile Strength | 127 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 4.5 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 8270 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 193 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 210 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 1000 | J/m | ASTM D4812 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.50 mm) | HB | UL 94 |
| Additional Information |
|---|
| The value listed as Flammibility, UL 94, was tested in accordance with RTP Company methods. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 216 - 266 | °C | |
| Middle Temperature | 216 - 266 | °C | |
| Front Temperature | 216 - 266 | °C | |
| Mold Temperature | 66.0 - 104 | °C | |
| Injection Pressure | 69.0 - 103 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris ABS LHT811 | Sincerity Australia Pty Ltd. | ABS | Sindustris ABS |
| NuSil MED-4750 | NuSil Technology | Rubber | NuSil |
| NOTIO™ PN-3560 | Mitsui Chemicals America, Inc. | TPE | NOTIO™ |
| Daelim Po1y® LH-150H | DAELIM INDUSTRIAL CO., LTD. | HDPE | Daelim Po1y® |
| Gebalon 10-141 HI | geba Kunststoffcompounds GmbH | PC | Gebalon |
