Order Products : sales@su-jiao.com
MTEGRITY™ LLDPE LL107AA
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | M. Holland Company |
| Trademark: | MTEGRITY™ LLDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | L5T1pn_MTEGRITYLLDPELL107AA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Linear Low Density Polyethylene
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.916 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | 0.75 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D882 | ||
| MD : Break, 25 µm | 40.7 | MPa | ASTM D882 |
| TD : Break, 25 µm | 33.1 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 25 µm | 650 | % | ASTM D882 |
| TD : Break, 25 µm | 950 | % | ASTM D882 |
| Dart Drop Impact (25 µm) | 550 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 25 µm | 400 | g | ASTM D1922 |
| TD : 25 µm | 700 | g | ASTM D1922 |
| Additional Information |
|---|
| * Film properties based on 1 mil film with 3:1 BUR. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1003 UV | RTP Company | PBT | RTP |
| Tarnamid® T-27 GF 10 | Grupa Azoty S.A. | Nylon 6 | Tarnamid® |
| 3M™ Dyneon™ Fluoroplastic PFA 6515NZS | 3M Advanced Materials Division | PFA | 3M™ Dyneon™ Fluoroplastic |
| ASTAMID™ MB3SW | Marplex Australia Pty. Ltd. | Nylon 6 | ASTAMID™ |
| LNP™ COLORCOMP™ 141RC compound | SABIC Innovative Plastics | PC | LNP™ COLORCOMP™ |
