Order Products : sales@su-jiao.com
EMOPLEN® A 830 G3
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | EMAS Plastik San.Tic.AS. |
| Trademark: | EMOPLEN® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | L20ARI_EMOPLEN-A-830-G3.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Polypropylene %30 glass fiber reinforced |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.10 to 1.15 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 7.0 to 9.0 | g/10 min | ISO 1133 |
| Molding Shrinkage | 0.30 to 0.60 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 70 to 75 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 6000 to 10000 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 60.0 to 100 | MPa | ISO 527-2 |
| Tensile Strain (Break) | > 4.0 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength | > 25 | kJ/m² | ISO 180/1A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 130 | °C | ISO 75-2/A |
| Vicat Softening Temperature | 120 | °C | ISO 306/B |
| Melting Temperature (DSC) | 160 | °C | ISO 3146 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shandong PP PQ02 | Shandong Dongchen Engineering Plastics Co., Ltd. | PP, Unspecified | Shandong PP |
| STRATOR® C-6 | EPIC Polymers | TP, Unspecified | Strator® |
| Ultrason® E 2010 G6 | BASF Corporation | PESU | Ultrason® E |
| ALTECH® PA6 A 1000/109 BK1011-13LSC | ALBIS PLASTIC GmbH | Nylon 6 | ALTECH® PA6 |
| LNP™ FARADEX™ NX07344 compound | SABIC Innovative Plastics Asia Pacific | PC+ABS | LNP™ FARADEX™ |
