Order Products : sales@su-jiao.com
Jam PE 526F1
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Jam Petrochemical Company |
| Trademark: | Jam PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | L1UPlc_Jam-PE-526F1.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Jam PE 526F1 is a High Density Polyethylene product. It can be processed by blow molding and is available in Africa & Middle East. Typical application: Containers. Primary characteristic: impact resistant. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.952 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 0.12 | g/10 min | |
| 190°C/5.0 kg | 0.55 | g/10 min | |
| Environmental Stress-Cracking Resistance | 100 | hr | |
| Flow Rate Ratio | > 120 | ASTM D1238 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Titanium | 3 | ppm |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, Compression Molded | 27.5 | MPa | |
| Break, Compression Molded | 34.0 | MPa | |
| Tensile Elongation (Break, Compression Molded) | > 850 | % | ASTM D638 |
| Flexural Modulus (Compression Molded) | 1230 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 250 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 126 | °C | ASTM D1525 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Yellowness Index | 0.0 | YI | ASTM D1925 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tarnoform® 200 | Grupa Azoty S.A. | Acetal (POM) Copolymer | Tarnoform® |
| DOW™ LDPE 608A | The Dow Chemical Company | LDPE | DOW™ LDPE |
| InsaGum® 1028 | INSA | SBR, Emulsion | InsaGum® |
| MAJORIS EB300E - 8229 | AD majoris | HDPE | MAJORIS |
| POLIMAXX 1202J | IRPC Public Company Limited | PP Homopolymer | POLIMAXX |
