Order Products : sales@su-jiao.com
En Chuan 6120TWA
| Category: | Polyester, TS , Thermoset Polyester |
| Manufacturer: | En Chuan Chemical Industries Co,. Ltd. |
| Trademark: | En Chuan |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | KvKexN_En-Chuan-6120TWA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| This resin contains thixotropy, wax and accelerator. 6120TWA is a general purpose resin, suitable for hand lay-up application in producing bathtubs, water tanks, and other similar FRP products. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Barcol Hardness 1 | 42 | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus 2 | 8570 | MPa | ASTM D790 |
| Flexural Strength 3 | 206 | MPa | ASTM D790 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Thixotropic Index (25°C) | 1.50 - 2.50 | ||
| Red Accelerator, Co-oct (Co 6%): .5%Hardener, MEKPO (PO content, 55%): 1% |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Density (25°C) | 1.11 - 1.13 | g/cm³ | |
| Viscosity (25°C) | 0.40 - 0.60 | Pa·s | |
| Gel Time (25°C) | 8.0 - 15 | min |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength 4 | 124 | MPa |
| Note Message | |
|---|---|
| 1 . | Barcol 934-1 , Unfilled |
| 2 . | Filled |
| 3 . | Filled |
| 4 . | Filled |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SureSpec HD53-5000 | Genesis Polymers | HDPE | SureSpec |
| TABOND 2003 | SILON s.ro | Plastomer | TABOND |
| NITRIFLEX NP-2174 | NITRIFLEX | PVC+NBR | NITRIFLEX |
| GAPEX® RPP30EA16NA | Ferro Corporation | PP Homopolymer | GAPEX® |
| Lupox® LW5303F | LG Chem Ltd. | PC+PBT | Lupox® |
