Order Products : sales@su-jiao.com

INSPIRE™ TF1305 SC

Category:	TPO , Performance Polymers
Manufacturer:	Trinseo
Trademark:	INSPIRE™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Kq2uNd_INSPIRE-TF1305-SC.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Talc filled (16%), high impact PP Compound.

INSPIRE* TF1305 SC has been developed for covered interior automotive applications. Also designed for self-coloration (SC) in combination with PROMATCH* combi-masterbatches for uncovered applications with high demanding aesthetics, scratch resistance, and UV light stabilisation.

It is especially suitable for car interior applications requiring ductility, because of its high impact resistance, even at low temperature.

Applications:

Instrument panel retainer

Instrument panel trim

Mid console

Door panels

Door pockets

Interior trim

Trunk trim

General Information
Filler / Reinforcement	Talc filler, 16% filler by weight
Features	Impact resistance, high Low temperature impact resistance Scratch resistance Good appearance ductility
Uses	Application in Automobile Field Car interior parts Car dashboard
Forms	Particle
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Density	1.02	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	9.5	g/10 min	ISO 1133
Molding Shrinkage	0.90 - 1.2	%

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	1950	MPa	ISO 527-2/1
Tensile Stress (Yield)	20.0	MPa	ISO 527-2/50
Tensile Strain (Break)	70	%	ISO 527-2/50
Flexural Modulus	1850	MPa	ISO 178

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact			ISO 180/1A
0°C	8.0	kJ/m²	ISO 180/1A
23°C	15	kJ/m²	ISO 180/1A
Multi-Axial Instrumented Impact Energy (23°C, Energy to Break, Toughness Failure)	70.0	J	ISO 6603-2

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
0.45 MPa, not annealed	110	°C	ISO 75-2/B
1.8 MPa, not annealed	58.0	°C	ISO 75-2/A
Vicat Softening Temperature	135	°C	ISO 306/A120
CLTE - Flow	8.5E-5	cm/cm/°C	ASTM D696

Additional Information
The information and data contained herein is specific to the natural (neat) product. For properties of the material in combination with PROMATCH* combi-masterbatches (PP Combi Masterbatch CMPP 10.22 and CMPP 10.23) please refer to the technical data sheet for INSPIRE* TF1305 ESU.

Resin Grade	Manufacturer	Category	Trademark
RTP 4285	RTP Company	PI, TP	RTP
VITAMIDE® BX30WT6090	Jackdaw Polymers	Nylon 6	VITAMIDE®
Clariant Nylon 6/6 66G43M	Clariant Corporation	Nylon 66	Clariant Nylon 6/6
Hanwha Total PP BI730	HANWHA TOTAL PETROCHEMICALS Co., Ltd.	PP, High Crystal	Hanwha Total PP
Durethan® BKV 25 FN01 000000	LANXESS GmbH	Nylon 6	Durethan®