Order Products : sales@su-jiao.com

NuSil MED-6019

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	KotYAX_NuSil-MED-6019.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications. Low consistency elastomers (LCEs) are useful alternatives to liquid silicone rubber (LSR) and high consistency rubber (HCR) for end users who need a low viscosity elastomer which provides other unique properties. LCEs lend themselves to applications that require a pourable, self-leveling silicone. Applications include: encapsulating a device, backfilling a void, potting an electronic component that cannot withstand exposure to high heat, or prototyping a mold. Comments: LOW VISCOSITY, HIGH DUROMETER

Message

NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications.

Low consistency elastomers (LCEs) are useful alternatives to liquid silicone rubber (LSR) and high consistency rubber (HCR) for end users who need a low viscosity elastomer which provides other unique properties.

LCEs lend themselves to applications that require a pourable, self-leveling silicone. Applications include: encapsulating a device, backfilling a void, potting an electronic component that cannot withstand exposure to high heat, or prototyping a mold.

Comments: LOW VISCOSITY, HIGH DUROMETER

General Information
Features	Good Processability High Hardness Low Viscosity
Uses	Electrical/Electronic Applications Medical/Healthcare Applications
Agency Ratings	USP Class VI
Appearance	Clear/Transparent
Processing Method	Encapsulating Potting

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 1.0
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum

Uncured Properties	Nominal Value	Unit
Density	1.07	g/cm³
Viscosity
-- ¹	20	Pa·s
-- ²	30	Pa·s
Curing Time (50°C)	2.0	hr
Pot Life (25°C)	120	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	75
Tensile Strength	8.27	MPa
Tensile Elongation at Break	65	%
Tear Strength	6.13	kN/m

Note Message
1 .	Part B
2 .	Part A

Resin Grade	Manufacturer	Category	Trademark
QR Resin QR-1000F-GFR10	QTR, Inc.	PC	QR Resin
TRIMMA® FM6381UV	Samyang Corporation	Acrylic (PMMA)	TRIMMA®
Ultramid® A3K Q601	BASF Corporation	Nylon 66	Ultramid®
Chemlon® 100	Teknor Apex Company (Chem Polymer)	Nylon 66	Chemlon®
LEXAN™ EXL1890T resin	SABIC Innovative Plastics	PC	LEXAN™