Order Products : sales@su-jiao.com
CERTENE™ PHI-12
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | KgTC99_CERTENE-PHI-12.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PHI-12 is a certified prime grade specially designed for fiber applications featuring High melt flow. PHI-12 applications include staple fiber and oriented yarn. PHI-12 complies with FDA regulation 21CFR 177.1520(a)(3)(i)/(c)3.2 concerning the Polypropylene use in contact with food articles, not to exceed 100°C. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.905 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 11 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness 1(R-Scale) | 90 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 37.7 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 8.0 | % | ASTM D638 |
| Flexural Modulus 2 | 1680 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact 3(23°C) | 32 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load 4(0.45 MPa, Unannealed) | 94.0 | °C | ASTM D648 |
| Vicat Softening Temperature 5 | 155 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | Tests made on injection-molded Type 1 tension test specimens 1/8' (3.2mm) thick molded according to ASTM D 2146. |
| 2 . | ASTM D638 Type 1 specimen, molded and tested in accordance with ASTM D4101. |
| 3 . | Tests made on injection-molded Type 1 tension test specimens 1/8' (3.2mm) thick molded according to ASTM D 2146. |
| 4 . | Tests made on injection-molded Type 1 tension test specimens 1/8' (3.2mm) thick molded according to ASTM D 2146. |
| 5 . | Tests made on injection-molded Type 1 tension test specimens 1/8' (3.2mm) thick molded according to ASTM D 2146. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Matrixx 30S5301 | The Matrixx Group, Inc. | PBT | Matrixx |
| SCANAMID 66 A53^ F43 | Polykemi AB | Nylon 66 | SCANAMID 66 |
| Bionolle™ 1020 MD | Showa Denko K.K. | Biodeg Polymers | Bionolle™ |
| EGYPTENE LL 0209 AA | Sidpec (Sidi Kerir Petrochemicals Co.) | LLDPE | EGYPTENE |
| ALCOM® PA66 910/1 AR20 | ALBIS PLASTIC GmbH | Nylon 66 | ALCOM® PA66 |
