Telcar® TL-8730A Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
Telcar TL-8730A is a high performance flame retardant thermoplastic elastomer designed for electrical applications requiring flexibility over a wide temperature range. Telcar TL-8730A is a high density, higher hardness, UL 94 V-0 grade with good UV stability and is suitable for both injection molding and extrusion.

General Information
Features	Flexibility at low temperatures High tensile strength High density Good UV resistance Good electrical performance Good heat aging resistance Good coloring Medium liquidity Halogenated Sunlight resistance, 720 hours Fill brominated Extended tensile rate High hardness Flame retardancy
Uses	Flame Retardant Insulation Flame Retardant Jacketing Industrial Cable Jacketing Underground cable Cable sheath Electrical wire sheath material Electrical conductor insulation material Wire and cable applications Wire sheath Industrial cable insulation material Connector cord sheath Terminal cable sheath material
RoHS Compliance	RoHS compliance
Appearance	Natural color
Forms	Particle
Processing Method	Extrusion Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.25	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)	15	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	86		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Strength (Break)	12.4	MPa	ASTM D412
Tensile Elongation (Break)	600	%	ASTM D412

Aging	Nominal Value	Unit	Test Method
Change in Tensile Strength in Air (158°C, 168 hr)	-2.0	%	ASTM D573
Change in Ultimate Elongation in Air (158°C, 168 hr)	-13	%	ASTM D573
Change in Tensile Strength (60°C, 168 hr, in IRM 902 Oil)	-7.0	%	ASTM D471
Change in Ultimate Elongation (60°C, 168 hr, in IRM 902 Oil)	-3.0	%	ASTM D471

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature	-55.0	°C	ASTM D746

Electrical	Nominal Value	Unit	Test Method
Dielectric Strength	39	kV/mm	ASTM D149
Dielectric Constant (1 kHz)	2.40		ASTM D150
Dissipation Factor (25°C, 1 MHz)	4.0E-3		ASTM D150

Flammability	Nominal Value	Unit	Test Method
Flame Rating (1.5 mm, NT)	V-0		UL 94
Oxygen Index	28	%	ASTM D2863

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Rear Temperature	171 - 193	°C
Middle Temperature	177 - 199	°C
Front Temperature	182 - 204	°C
Nozzle Temperature	188 - 210	°C
Processing (Melt) Temp	188 - 210	°C
Mold Temperature	25 - 66	°C
Injection Pressure	1.38 - 6.89	MPa
Injection Rate	Moderate-Fast
Back Pressure	0.172 - 0.345	MPa
Screw Speed	50 - 100	rpm
Cushion	3.81 - 25.4	mm

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.	166 - 188	°C
Cylinder Zone 2 Temp.	171 - 193	°C
Cylinder Zone 3 Temp.	177 - 199	°C
Cylinder Zone 4 Temp.	177 - 199	°C
Cylinder Zone 5 Temp.	182 - 204	°C
Die Temperature	190 - 210	°C

Extrusion instructions
Screw Speed: 30 to 100 rpm

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Telcar®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Kg8ugY_TelcarTL8730A.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Santoprene™ 123-40	ExxonMobil Chemical	TPV	Santoprene™
Sylvin 2920-60 Clear	Sylvin Technologies Incorporated	PVC, Flexible	Sylvin
Sup-tech AS103	Shanghai Suptech Engineering Plastics Co. Ltd.	ABS+Nylon	Sup-tech
KOPHOS® KO1380	Kolon Plastics, Inc.	PC	KOPHOS®
Optix® CA-81 FDA	Plaskolite, Inc.	Acrylic (PMMA)	Optix®