Order Products : sales@su-jiao.com

Premi-Glas® 3406

Category:	TS, Unspecified , Thermoset, Unspecified
Manufacturer:	Premix, Inc.
Trademark:	Premi-Glas®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Kf3mBI_Premi-Glas-3406.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Premi-Glas® 3406 is a fiberglass reinforced thermoset sheet molding compound for mass transit third rail insulators and other semi-structural applications where low smoke and low flammability are required.

Radiant panel flame spread index of less than 20 per ASTM E-162.

Smoke Density of less than 25 per ASTM E662 (NBS smoke chamber).

Excellent flexural strength and outstanding toughness.

Halogen-free flame retardant system for reduced smoke toxicity.

Material properties conform to requirements of NYCTA 60-MTA.

General Information
Filler / Reinforcement	Glass Fiber
Additive	Flame Retardant
Features	Flame Retardant Good Strength Good Toughness Halogen Free Low Smoke Emission
Uses	Electrical/Electronic Applications Industrial Applications
UL File Number	E42524
Forms	SMC - Sheet Molding Compound

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (Compression Molded)	14500	MPa	ASTM D638
Tensile Strength (Compression Molded)	128	MPa	ASTM D638
Tensile Elongation (Break, Compression Molded)	1.2	%	ASTM D638
Flexural Modulus (Compression Molded)	12400	MPa	ASTM D790
Flexural Strength (Compression Molded)	272	MPa	ASTM D790
Poisson's Ratio	0.30

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (Compression Molded)	1300	J/m	ASTM D256

Thermal	Nominal Value	Unit
CLTE
Flow ¹	1.0E-5 to 2.0E-5	cm/cm/°C
Transverse ²	2.0E-5 to 3.0E-5	cm/cm/°C
Thermal Conductivity	0.30	W/m/K

Electrical	Nominal Value	Unit	Test Method
Dielectric Strength	16	kV/mm	ASTM D149
Arc Resistance	190	sec	ASTM D495

Flammability	Nominal Value	Unit	Test Method
NBS Smoke Density - Ds at 4 min	< 25.0		ASTM E662
Radiant Panel Flame Spread Index	< 20.0		ASTM E162

Additional Information	Nominal Value	Unit	Test Method
Track Resistance - 2.5 kV	> 12.5	hr	ASTM D6303

Injection	Nominal Value	Unit
Mold Temperature	149	°C
Injection Pressure	3.45 to 6.89	MPa

Note Message
1 .	XY direction
2 .	Z direction

Resin Grade	Manufacturer	Category	Trademark
Xuchuan XCW-35MK	Xuchuan Chemical (Suzhou) Co., Ltd	PUR, Unspecified	Xuchuan
Asaflex™ 810	AKelastomers	SBS	Asaflex™
Celstran® PP-GF30-02 AF 3001	Celanese Corporation	PP, Unspecified	Celstran®
Laprene® 83E200A25	SO.F.TER. SPA	SEBS	Laprene®
INSULCAST® 961 FR	ITW Polymers Coatings North America	Epoxy	INSULCAST®