Order Products : sales@su-jiao.com
Borealis PE MG9601
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Borealis AG |
| Trademark: | Borealis PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | KeFlZd_Borealis-PE-MG9601.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
MG9601 is a high density polyethylene The grade is characterized by excellent flow properties, minor distortion and high stiffness. Applications:
Special features:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.960 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 31 | g/10 min | ISO 1133 |
| Molding Shrinkage - Flow | 1.0 - 2.0 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 62 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 1250 | MPa | ISO 527-2/1 |
| Tensile Stress (Yield, Injection Molded) | 29.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Yield, Injection Molded) | 9.0 | % | ISO 527-2/50 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 2.5 | kJ/m² | ISO 179/1eA |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 71.0 | °C | ISO 75-2/B |
| Additional Information |
|---|
| The product(s) mentioned herein are not intended to be used for medical, pharmaceutical or healthcare applications and we do not support their use for such applications. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 180 - 240 | °C | |
| Mold Temperature | 10.0 - 40.0 | °C | |
| Injection Rate | Fast |
| Injection instructions |
|---|
| Holding Pressure: as low as possible |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRE-ELEC® PS 1340 | Premix Oy | PS Alloy | PRE-ELEC® |
| VESTAMID® E EX9200 | Evonik Industries AG | Nylon 12 | VESTAMID® E |
| Zhongfa PP FR-28 | Yuyao Zhongfa Engineering Plastics Co. Ltd. | PP, Unspecified | Zhongfa |
| ALCOM® POM 770/1.1 CF20 | ALBIS PLASTIC GmbH | Acetal (POM) Copolymer | ALCOM® POM |
| Sylvin 29168-95 Clear | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
