Order Products : sales@su-jiao.com
Laprene® 83C000899
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | SO.F.TER. SPA |
| Trademark: | Laprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | KdG46M_Laprene-83C000899.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Laprene®83C000899 is a styrene-ethylene-butene-styrene block copolymer (SEBS) material,. This product is available in North America, Latin America or Europe. The processing method is: extrusion. Laprene®The main characteristics of 83C000899 are: compliance with REACH standards. |
| General Information | |
|---|---|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.23 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 3 sec) | 70 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(100% Strain) | 2.10 | MPa | ASTM D412 |
| Tensile Strength 2 | 9.00 | MPa | ASTM D412 |
| Tensile Elongation 3(Break) | 730 | % | ASTM D412 |
| Tear Strength 4 | 34.0 | kN/m | ASTM D624 |
| Compression Set 5(70°C, 22 hr) | 76 | % | ASTM D395B |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 160 | °C | |
| Cylinder Zone 2 Temp. | 170 | °C | |
| Cylinder Zone 3 Temp. | 180 | °C | |
| Die Temperature | 180 | °C |
| Extrusion instructions |
|---|
| Extrusion Head Temperature: 185°C |
| Note Message | |
|---|---|
| 1 . | Mouth die c |
| 2 . | Mouth die c |
| 3 . | Mouth die c |
| 4 . | C mould |
| 5 . | Type 1 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VITAMIDE® BFH13 | A. Schulman Europe | Nylon 6 | VITAMIDE® |
| Ultramid® B3WGM24 sw23228 | BASF Corporation | Nylon 6 | Ultramid® |
| ALCOM® PA66 910/1 GF15 MR25 | ALBIS PLASTIC GmbH | Nylon 66 | ALCOM® PA66 |
| FR-PET® B3045FA | Polyplastics Co., Ltd. | PET | FR-PET® |
| PENTAMID AB L5 H natur | PENTAC Polymer GmbH | Nylon 66/6 | PENTAMID AB |
