Order Products : sales@su-jiao.com
DURACON® M90LP
| Category: | Acetal (POM) Copolymer , Acetal (POM) Copolymer |
| Manufacturer: | Polyplastics Co., Ltd. |
| Trademark: | DURACON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | KcyNa7_DURACON-M90LP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Laser penetrate |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Part Marking Code (ISO 11469) |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 9.0 | g/10 min | ISO 1133 |
| Melt Volume-Flow Rate (MVR) (190°C/2.16 kg) | 8.00 | cm³/10min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2750 | MPa | ISO 527-2 |
| Tensile Stress | 61.0 | MPa | ISO 527-2 |
| Nominal Tensile Strain at Break | 12 | % | ISO 527-2 |
| Flexural Modulus | 2540 | MPa | ISO 178 |
| Flexural Stress | 82.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 7.4 | kJ/m² | ISO 179/1eA |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Color Number | PL-T7A735 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 - 90.0 | °C | |
| Drying Time | 3.0 - 4.0 | hr | |
| Processing (Melt) Temp | 190 - 210 | °C | |
| Mold Temperature | 60.0 - 80.0 | °C | |
| Injection Pressure | 49.0 - 98.0 | MPa | |
| Screw Speed | 100 - 150 | rpm |
| Injection instructions |
|---|
| Injection speed: 5-50 mm/sInjection Holding pressure: Gate sealing time + alphaCooling: Plasticizing time or ejection capable time |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ming Dih EPS FM | Ming Dih Group Corporation | PS (EPS) | Ming Dih EPS |
| SuperLite® SL551600-100 (4.0mm) | Azdel, Inc. | PP, Unspecified | SuperLite® |
| TRIREX® Compound CX3024NH | Samyang Corporation | PC | TRIREX® Compound |
| ALCOM® PWL 10/1.1 AS UV WT1127-11LB | ALBIS PLASTIC GmbH | PC | ALCOM® PWL |
| Plaslube® PEEK 6112 | Techmer Engineered Solutions | PEEK | Plaslube® |
