DIC.PPS FZ-3600-R5

Category: PPS , Polyphenylene Sulfide
Manufacturer: DIC Corporation
Trademark: DIC.PPS
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: KcB2tg_DIC-PPS-FZ-3600-R5.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
  • Outline: FZ-3600-R5 is a GF/Mineral filled PPS compound which provides excellent hydrolytic stability for use of applications exposed to hot water or engine coolant.
  • Color: Black
General Information
Filler / Reinforcement
  • Glass\Mineral
Features
  • Hydrolytically Stable
UL File Number
  • E53829
Appearance
  • Black
Forms
  • Pellets
Processing Method
  • Injection Molding
PhysicalNominal ValueUnitTest Method
Specific Gravity 1.96g/cm³ASTM D792
Molding Shrinkage ASTM D955
    Flow 0.25%
    Across Flow 1.0%
Water Absorption (23°C, 24 hr)0.020%ASTM D570
HardnessNominal ValueUnitTest Method
Rockwell Hardness ASTM D785
    M-Scale 100
    R-Scale 121
MechanicalNominal ValueUnitTest Method
Tensile Modulus 18500MPaASTM D638
Tensile Strength 150MPaASTM D638
Tensile Elongation (Break)1.0%ASTM D638
Flexural Modulus 17500MPaASTM D790
Flexural Strength 230MPaASTM D790
Compressive Strength 170MPaASTM D695
Poisson's Ratio 0.34
Coefficient of Friction ASTM D1894
    vs. Steel - Dynamic 0.35
    vs. Steel - Static 0.35
Flexural Elongation at Break 1.5%ASTM D790
ImpactNominal ValueUnitTest Method
Notched Izod Impact 75J/mASTM D256
Unnotched Izod Impact 320J/mASTM D256
ThermalNominal ValueUnitTest Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)265°CASTM D648
CLTE ASTM D696
    Flow : -30 to 90°C 1.7E-5cm/cm/°C
    Transverse : -30 to 90°C 1.7E-5cm/cm/°C
ElectricalNominal ValueUnitTest Method
Volume Resistivity 1.0E+16ohms·cmASTM D257
Dielectric Strength (1.60 mm)16kV/mmASTM D149
Dielectric Constant (1 MHz)5.00ASTM D150
Dissipation Factor (1 MHz)8.0E-3ASTM D150
Arc Resistance 180secASTM D495
Comparative Tracking Index 250VASTM D3638
FlammabilityNominal ValueUnitTest Method
Flame Rating (0.800 mm)V-0UL 94
InjectionNominal ValueUnit
Rear Temperature 300 to 340°C
Middle Temperature 300 to 340°C
Front Temperature 300 to 340°C
Mold Temperature 120 to 150°C
Resin Grade Manufacturer Category Trademark
TECHNO ABS 830P Techno Polymer Co, Ltd. ABS TECHNO ABS
Ad-Tech Epoxy EL-325-1-HTTC Ad-Tech Plastic Systems Corp. Epoxy Ad-Tech Epoxy
AKROTEK® PEEK natural (4447) AKRO-PLASTIC GmbH PEEK AKROTEK®
Catalyst LV/1 Solvay Specialty Polymers Polyolefin, Unspecified Catalyst
LG ABS MA210 LG Chem Ltd. ABS LG ABS