Order Products : sales@su-jiao.com
Andur AL 95 AP/Curene® 111
| Category: | PUR-Eth,aliphat , Polyurethane (Polyether, Aliphatic) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | KadoTG_Andur-AL-95-AP-Curene-111.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur AL95AP is a polyether (PTMG) based prepolymer terminated with aliphatic isocyanates to increase color stability, and give longer pot life. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Durometer Hardness (Shore A) | 96 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 14.2 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 40.7 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 280 | % | ASTM D412 |
| Bayshore Resilience | 45 | % | ASTM D2632 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Pot Life | 5.0 - 6.0 | min | |
| Demold Time (100°C) | 20 | min | |
| Post Cure Time | |||
| 21°C | 72 | hr | |
| 100°C | 16 | hr |
| Additional Information |
|---|
| Die C Tear, ASTM D1004: 380 pliAverage Split Tear, ASTM D1938: 110 pliStoichiometry Curative Level: 95%Mix Temperature: Andur AL 95 AP: 190°F Curene 111: 72°F |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| AIE PC 10G6F | Asia International Enterprise (Hong Kong) Limited | PC | AIE PC |
| Fainplast PVC PH 76/A | Fainplast Compounds S.r.l | PVC, Flexible | Fainplast PVC |
| ICORENE® N2002 | ICO Polymers EMEA, A Division of A. Schulman | Plastomer | ICORENE® |
| ESTOPLAST XU 6215BB51 | Ester Industries Ltd. | Nylon 66 | ESTOPLAST XU |
| ICORENE® 1506 | A. Schulman Europe | XLPE | ICORENE® |
