Order Products : sales@su-jiao.com

NuSil FS3-3730

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	KZqh1X_NuSil-FS3-3730.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections. Fuel Resistance Static Dissipation and Electrically Conductive Silicones Ice-Phobic Coatings General Purpose: Adhesives and Sealants Comment: Fuel Resistance, 100 m % , Fast Cure

Message

The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections.

Fuel Resistance

Static Dissipation and Electrically Conductive Silicones

Ice-Phobic Coatings

General Purpose: Adhesives and Sealants

Comment: Fuel Resistance, 100 m % , Fast Cure

General Information
Features	Electrically Conductive Fast Cure Fuel Resistant
Uses	Adhesives Aircraft Applications Sealants

Thermoset	Nominal Value	Unit
Tack Free Time	15.0	min

Additional Information	Nominal Value	Unit
Cure System	Acetoxy
Extrusion Rate	240	g/min
Operating Temperature	-50 to 200	°C

Uncured Properties	Nominal Value	Unit
Color	Translucent
Density	1.35	g/cm³
Curing Time (23°C)	72	hr

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	35
Tensile Strength	5.86	MPa
Tensile Elongation at Break	400	%
Tear Strength	9.63	kN/m

Resin Grade	Manufacturer	Category	Trademark
MAXAMID™ EPDM66G14-WT	Pier One Polymers, Inc.	Nylon 66	MAXAMID™
SABIC® PPcompound 7690	Saudi Basic Industries Corporation (SABIC)	PP, Unspecified	SABIC® PPcompound
TAROMID B 280 G2 X0	Taro Plast S.p.A.	Nylon 6	TAROMID B
Acrylloy 7	Spartech Plastics	Acrylic, Unspecified	Acrylloy
Grilamid® LV-65H FWA nat	EMS-GRIVORY	Nylon 12	Grilamid®