Order Products : sales@su-jiao.com
KRATON® D4433 P
| Category: | SIS , Styrene Isoprene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | KXiV4M_KRATON-D4433-P.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton D4433 P is an oiled, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied from North America in the physical form identified below.
Kraton D4433 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen and polymers. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.920 | g/cm³ | ASTM D4025 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 25 | g/10 min | |
| Antioxidant Additive 1 | 0.080 to 0.20 | % | Internal Method |
| Ash Content - T, Talc | 0.30 to 0.40 | % | Internal Method |
| Oil | 22 to 25 | % | Internal Method |
| Polystyrene Content | 20 to 24 | % | Internal Method |
| Solution Viscosity - Toluene, 25%w (25°C) | 380 | mPa·s | Internal Method |
| Volatile Matter | < 0.70 | % | Internal Method |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Diblock Content | 20.0 | ||
| Styrene/Rubber ratio | 22/78 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec, Compression Molded) | 29 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 2(300% Strain) | 1.03 | MPa | ASTM D412 |
| Tensile Strength 3(Yield) | 6.21 | MPa | ASTM D412 |
| Tensile Elongation 4(Yield) | 1500 | % | ASTM D412 |
| Note Message | |
|---|---|
| 1 . | Primary antioxidant is a non-staining, phenolic antioxidant. The antioxidant package also contains a non-TNPP secondary antioxidant at a target level of 0.2% wt. |
| 2 . | Measured on films cast from a solution in toluene. |
| 3 . | Measured on films cast from a solution in toluene. |
| 4 . | Measured on films cast from a solution in toluene. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1389 HEC | RTP Company | PPS | RTP |
| Toraycon® 1494X02 | Toray Resin Company | PBT | Toraycon® |
| ACCUTECH™ HP0336C40L | ACLO Compounders Inc. | PP Homopolymer | ACCUTECH™ |
| Larpeek 10 G/40 | LATI S.p.A. | PEEK | Larpeek |
| Plaslube® PEEK CF15 TL15 A HF | Techmer Engineered Solutions | PEEK | Plaslube® |
