Order Products : sales@su-jiao.com
Rhelon X1500-00
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | RheTech, Inc. |
| Trademark: | Rhelon |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | KVvyGm_Rhelon-X1500-00.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Rhelon X1500-00 is a Polyamide 6 (Nylon 6) product. It can be processed by injection molding and is available in North America. |
| General Information | |
|---|---|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.15 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 1.4 to 1.8 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 55.7 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield | 4.0 | % | |
| Break | 13 | % | |
| Flexural Modulus | 2450 | MPa | ASTM D790 |
| Flexural Strength | 75.8 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 35 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 185 | °C | |
| 1.8 MPa, Unannealed | 92.2 | °C | |
| Peak Melting Temperature | 216 | °C | ASTM D789 |
| CLTE - Flow | 6.2E-6 | cm/cm/°C | ASTM D696 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 79.4 | °C | |
| Suggested Max Moisture | 0.20 | % | |
| Suggested Max Regrind | 25 | % | |
| Rear Temperature | 218 to 235 | °C | |
| Middle Temperature | 229 to 252 | °C | |
| Front Temperature | 241 to 260 | °C | |
| Nozzle Temperature | 241 to 266 | °C | |
| Processing (Melt) Temp | 241 to 266 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Promyde® B25 | NUREL, S.A. | Nylon 6 | Promyde® |
| BMC 605LWR | Bulk Molding Compounds, Inc. | Polyester, TS | BMC |
| Diaterm® A27 GF30TF10 | DTR S.r.l. (Develop Thermoplastic Resins) | Nylon 6 | Diaterm® |
| Kaneka MUH W2015 | Kaneka Corporation | ABS | Kaneka MUH |
| SD POLYCA™ FD9082I02 | Sumika Styron Polycarbonate Limited | PC | SD POLYCA™ |
