Order Products : sales@su-jiao.com

KRATON® G4609 H

Category:	SEBS , Styrene Ethylene Butylene Styrene Block Copolymer
Manufacturer:	Kraton Polymers LLC
Trademark:	KRATON®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	KQ5zzp_KRATON-G4609-H.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Kraton G4609 H is a white mineral oil extended linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 33%. Nominal oil content of the polymer is 45.5%w (90 parts/100 parts rubber (phr)). It is supplied from North America in the physical form identified below. Kraton G4609 H supplied as a powder. Kraton G4609 H is used as a base material for themoplastic elastomer (TPE) compound formulations for a variety of applications. It is also used as a modifier of thermoplastics and bitumen. The inherent stability of SEBS polymers suggests the use of G4609H in applications that must withstand weathering and high processing temperatures.

Message

Kraton G4609 H is a white mineral oil extended linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 33%. Nominal oil content of the polymer is 45.5%w (90 parts/100 parts rubber (phr)). It is supplied from North America in the physical form identified below.

Kraton G4609 H supplied as a powder.

Kraton G4609 H is used as a base material for themoplastic elastomer (TPE) compound formulations for a variety of applications. It is also used as a modifier of thermoplastics and bitumen. The inherent stability of SEBS polymers suggests the use of G4609H in applications that must withstand weathering and high processing temperatures.

General Information
Features	Copolymer Good Weather Resistance High Heat Resistance
Uses	Plastics Modification
Appearance	White
Forms	Powder

Physical	Nominal Value	Unit	Test Method
Polystyrene Content ¹	31 to 35	%	Internal Method
Total Extractables	43 to 52	%	Internal Method
Volatile Matter	< 1.0	%	Internal Method

Additional Information	Nominal Value	Unit	Test Method
Dust - Calcium Carbonate	2.0 to 6.0	%	Internal Method

Elastomers	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	> 5.52	MPa	Internal Method

Note Message
1 .	Measured on the polymer before hydrogenation

Resin Grade	Manufacturer	Category	Trademark
RTP 303	RTP Company	PC	RTP
ShinkoLite-P V	Mitsubishi Rayon America Inc.	Acrylic (PMMA)	ShinkoLite-P
Next Nylon 66 Prime Series PXF-01NC	Next Polymers Ltd.	Nylon 66	Next Nylon 66 Prime Series
Anjacom® 150-GF30	Almaak International GmbH	PC	Anjacom®
DuraGrip® DGR 6150BK	Advanced Polymer Alloys	TPE	DuraGrip®