Order Products : sales@su-jiao.com
Stanyl® TW200F3
| Category: | Nylon 46 , Polyamide 46 |
| Manufacturer: | DSM Engineering Plastics |
| Trademark: | Stanyl® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | KPeEgY_Stanyl-TW200F3.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Stanyl® TW200F3 is a Polyamide 46 (Nylon 46) material filled with 15% glass fiber. It is available in Europe or North America. Important attributes of Stanyl® TW200F3 are:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Forms |
|
| Multi-Point Data |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.29 | -- | g/cm³ | ISO 1183 |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 3.2 | -- | % | ISO 62 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | ISO 527-2 | |||
| -- | 6100 | 2800 | MPa | |
| 120°C | 3000 | -- | MPa | |
| 160°C | 2650 | -- | MPa | |
| 180°C | 2500 | -- | MPa | |
| 200°C | 2350 | -- | MPa | |
| Tensile Stress | ISO 527-2 | |||
| Break | 140 | 70.0 | MPa | |
| Break, 120°C | 85.0 | -- | MPa | |
| Break, 160°C | 75.0 | -- | MPa | |
| Break, 180°C | 70.0 | -- | MPa | |
| Break, 200°C | 65.0 | -- | MPa | |
| Tensile Strain | ISO 527-2 | |||
| Break | 4.0 | 8.0 | % | |
| Break, 120°C | 12 | -- | % | |
| Break, 160°C | 12 | -- | % | |
| Break, 180°C | 12 | -- | % | |
| Break, 200°C | 12 | -- | % | |
| Flexural Modulus | 5800 | 2800 | MPa | ISO 178 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | |||
| -30°C | 6.0 | 6.0 | kJ/m² | |
| 23°C | 6.0 | 13 | kJ/m² | |
| Charpy Unnotched Impact Strength | ISO 179/1eU | |||
| -30°C | 45 | 50 | kJ/m² | |
| 23°C | 50 | 100 | kJ/m² | |
| Notched Izod Impact Strength | ISO 180/1A | |||
| -40°C | 6.0 | 6.0 | kJ/m² | |
| 23°C | 6.0 | 13 | kJ/m² |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 275 | -- | °C | ISO 75-2/A |
| Melting Temperature 1 | 295 | -- | °C | ISO 11357-3 |
| CLTE | ISO 11359-2 | |||
| Flow | 5.0E-5 | -- | cm/cm/°C | |
| Transverse | 8.0E-5 | -- | cm/cm/°C |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Volume Resistivity | 1.0E+14 | 1.0E+9 | ohms·cm | IEC 60093 |
| Comparative Tracking Index | 400 | -- | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flammability Classification (1.60 mm) | HB | -- | IEC 60695-11-10, -20 |
| Injection | Dry | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 4.0 to 8.0 | hr | |
| Rear Temperature | 280 to 320 | °C | |
| Middle Temperature | 300 to 320 | °C | |
| Front Temperature | 300 to 320 | °C | |
| Nozzle Temperature | 300 to 320 | °C | |
| Processing (Melt) Temp | 305 to 320 | °C | |
| Mold Temperature | 80.0 to 120 | °C | |
| Injection Rate | Moderate-Fast | ||
| Back Pressure | 2.00 to 10.0 | MPa | |
| Screw Compression Ratio | 2.5:1.0 |
| Note Message | |
|---|---|
| 1 . | 10°C/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxxam™ MN-818.T001-8001 | PolyOne Corporation | PP, Unspecified | Maxxam™ |
| Evoprene™ GF 6256 | AlphaGary | SBC | Evoprene™ GF |
| DENILUB Y 50G 0Mo | Vamp Tech | Nylon 66 | DENILUB |
| Huafon HF-3390AX | Huafon Group Co., Ltd. | TPU-Polyester | Huafon |
| Durethan® BKV 230 H2.0 DUS008 000000 | LANXESS GmbH | Nylon 6 | Durethan® |
