Order Products : sales@su-jiao.com
Generic ABS - Glass Bead
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | KPHXeK_Generic-ABS---Glass-Bead.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic ABS - Glass Bead This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.06 - 1.38 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (23°C) | 0.40 - 0.70 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.16 - 0.25 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 2730 - 3450 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 2.0 - 10 | % | ASTM D638 |
| Flexural Modulus (23°C) | 2400 - 2970 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 49.3 - 62.7 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 45 - 130 | J/m | ASTM D256 |
| Unnotched Izod Impact (23°C) | 270 - 800 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 80.6 - 99.0 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 - 82.2 | °C | |
| Drying Time | 2.0 - 9.0 | hr | |
| Rear Temperature | 210 - 252 | °C | |
| Middle Temperature | 229 - 252 | °C | |
| Front Temperature | 215 - 271 | °C | |
| Processing (Melt) Temp | 220 - 260 | °C | |
| Mold Temperature | 64.8 - 79.5 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic ABS - Glass BeadThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Desmovit® DP R 9920 | geba Kunststoffcompounds GmbH | TPU-Ester/Ether | Desmovit® |
| OPTODYNE™ UV-3000 | DAIKIN AMERICA, INC. | Epoxy | OPTODYNE™ |
| Polifil® PP RMC-20 | The Plastics Group | PP Impact Copolymer | Polifil® PP |
| Sylvin 9658-45UV Brown 7416 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| CYCOLAC™ MG38F resin | SABIC Innovative Plastics | ABS | CYCOLAC™ |
