Order Products : sales@su-jiao.com
TERRAMAC HV-6250H
| Category: | PLA , Polylactic Acid |
| Manufacturer: | UNITIKA Plastics Division |
| Trademark: | TERRAMAC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | KOqXqQ_TERRAMAC-HV-6250H.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TERRAMAC HV-6250H is a polylactic acid (PLA) material,. This product is available in North America, Europe or Asia Pacific. The processing methods are: compression molding, foam processing or vacuum molding. The main characteristics of TERRAMAC HV-6250H are: environmental protection/green. Typical application areas include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.27 | g/cm³ | ISO 1183 |
| Molding Shrinkage | 1.0 - 3.0 | % | ISO 294-4 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 69.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 2.0 | % | ISO 527-2 |
| Flexural Modulus | 4700 | MPa | ISO 178 |
| Flexural Stress | 111 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 1.9 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 120 | °C | ISO 75-2/B |
| Melting Temperature | 170 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 180 - 200 | °C | |
| Cylinder Zone 2 Temp. | 190 - 230 | °C | |
| Cylinder Zone 3 Temp. | 190 - 220 | °C | |
| Die Temperature | 150 - 180 | °C |
| Extrusion instructions |
|---|
| Cooling zone temperature: 170 to 200°CVacuum and pressure molding conditions:Pre-heater temp: 150 to 280°CSheet temp: 80 to 140°CPre-heating time: 4 to 16 secPressing time: 4 to 16 secDie temp: 20 to 120°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris PBT HI2101M | Sincerity Australia Pty Ltd. | PBT | Sindustris PBT |
| API PS 395 | American Polymers, Inc. | PS (GPPS) | API PS |
| EnCom PC 1611UR | EnCom, Inc. | PC | EnCom |
| Glastic® CBC-C | Glastic Corporation | Polyester, TS | Glastic® |
| Kumho KNB 35LL | Korea Kumho Petrochemical Co., Ltd. | NBR | Kumho KNB |
