Order Products : sales@su-jiao.com
Bormed™ HD810MO
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Borealis AG |
| Trademark: | Bormed™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | KKB0Tg_Bormed-HD810MO.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Bormed HD810MO is a polypropylene homopolymer This polymer grade is intended for production of medical and medical-related articles. In addition it can be sterilized with gamma radiation and has an excellent chemical resistance. Products moulded from this grade and radiated with the dose of 25 kGy have a shelf-life of 5 years, if stored below 40°C. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.907 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 10 | g/10 min | ISO 1133 |
| Molding Shrinkage | 1.0 to 2.0 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 94 | ISO 2039-2 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 1100 | MPa | ISO 527-2/1 |
| Tensile Stress (Yield) | 29.5 | MPa | ISO 527-2/50 |
| Tensile Strain (Yield) | 13 | % | ISO 527-2/50 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 4.5 | kJ/m² | ISO 179/1eA |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature 1(0.45 MPa, Unannealed) | 90.0 | °C | ISO 75-2/B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 220 to 260 | °C | |
| Mold Temperature | 30.0 to 40.0 | °C | |
| Injection Rate | Moderate-Fast | ||
| Holding Pressure | 20.0 to 50.0 | MPa |
| Note Message | |
|---|---|
| 1 . | Injection molded specimen |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ALCOM® PA66 910/1 GF30 PTFE15 SI2 | ALBIS PLASTIC GmbH | Nylon 66 | ALCOM® PA66 |
| Andur 7501 DPLF/Curene® 442 | Anderson Development Company | PUR-Ether/TDI | Andur |
| ExxonMobil™ PP7414 | ExxonMobil Chemical | PP Impact Copolymer | ExxonMobil™ |
| Hostaform® C 52021 LS | Celanese Corporation | PPS | Hostaform® |
| TECHNYL® C 52G3 MZ25 GREY R7035 | Solvay Engineering Plastics | Nylon 6 | TECHNYL® |
