Order Products : sales@su-jiao.com
Desmopan® DP 3862D
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Covestro - PUR |
| Trademark: | Desmopan® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | KHmWXt_Desmopan-DP-3862D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| injection molding grade; modified with ABS; good low-temperature flexibility; good wear resistance; Application; Ski boot shells; Injection molded engineering parts |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Shore Hardness (Shore D, 23°C) | 61 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1 | DIN 53504 | ||
| Break, 23°C | 56.0 | MPa | |
| 100% Strain, 23°C | 25.0 | MPa | |
| 300% Strain, 23°C | 41.0 | MPa | |
| Tensile Strain 2(Break, 23°C) | 420 | % | DIN 53504 |
| Flexural Modulus 3(23°C) | 260 | MPa | ISO 178 |
| Tensile Storage Modulus | ISO 6721-1,-4 | ||
| -20°C | 1.62 | GPa | |
| 20°C | 0.535 | GPa | |
| 60°C | 0.184 | GPa |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 230 to 245 | °C | |
| Mold Temperature | 40.0 to 60.0 | °C |
| Note Message | |
|---|---|
| 1 . | 200 mm/min |
| 2 . | 200 mm/min |
| 3 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RAMAPET® H1 | Indorama Ventures PCL | PET | RAMAPET® |
| S&E Wire & Cable GTPO9008-1 | S&E Specialty Polymers, LLC | TPO (POE) | S&E Wire & Cable |
| LUVOCOM® 1301-8312-1 | Lehmann & Voss & Co. | PPS | LUVOCOM® |
| Mafill® CR XM 5146 | Ravago Group | PP, Unspecified | Mafill® |
| Versaflex™ CL2000X | PolyOne Corporation | TPE | Versaflex™ |
