Order Products : sales@su-jiao.com

Eltex® MED HD5226EA-M

Category:	HDPE Copolymer , High Density Polyethylene Copolymer
Manufacturer:	INEOS Olefins & Polymers Europe
Trademark:	Eltex® MED
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	KDcQqt_Eltex-MED-HD5226EA-M.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
High Density Polyethylene for Pharmaceutical injection moulding. Eltex® MED HD5226EA-M is a high density polyethylene copolymer with a narrow molecular weight distribution, suitable for thin-wall injection moulding and fast-cycling applications. It allows high flow and low warpage during processing. Eltex® MED HD5226EA-M is produced according to Good Manufacturing Practices, and is available in granular form. Applications: Eltex® MED HD5226EA-M is especially recommended for manufacturing syringe components by injection moulding. It can also be used for manufacturing thin-walled containers and Caps & Closures intended for the primary packaging of medical and pharmaceutical applications.

Message

High Density Polyethylene for Pharmaceutical injection moulding.

Eltex® MED HD5226EA-M is a high density polyethylene copolymer with a narrow molecular weight distribution, suitable for thin-wall injection moulding and fast-cycling applications. It allows high flow and low warpage during processing.

Eltex® MED HD5226EA-M is produced according to Good Manufacturing Practices, and is available in granular form.

Applications:
Eltex® MED HD5226EA-M is especially recommended for manufacturing syringe components by injection moulding. It can also be used for manufacturing thin-walled containers and Caps & Closures intended for the primary packaging of medical and pharmaceutical applications.

General Information
Features	Copolymer Fast Molding Cycle High Density High Flow Low Warpage Narrow Molecular Weight Distribution
Uses	Caps Closures Medical/Healthcare Applications Packaging Thin-walled Containers
Agency Ratings	EP Monograph 3.1.3 EP Monograph 3.1.5 USP Class VI
RoHS Compliance	Contact Manufacturer
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.953	g/cm³	ISO 1872-1
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	26	g/10 min	ISO 1133
Environmental Stress-Cracking Resistance (23°C)	8.00	hr	ASTM D1693

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	1150	MPa	ISO 527-2/1B
Tensile Stress (Yield, 23°C)	26.0	MPa	ISO 527-2

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (23°C)	2.5	kJ/m²	ISO 179

Resin Grade	Manufacturer	Category	Trademark
Polytech & Net VC910	Polytech & Net Gmbh	EVA	Polytech & Net
NORYL™ FP3060 resin	SABIC Innovative Plastics Europe	PPE+PS	NORYL™
AZDEL™ C321B02N	Azdel, Inc.	PP Alloy	AZDEL™
Complet® LGF60-PA66 MT	PlastiComp, Inc.	Nylon 66	Complet®
Durethan® BKV 230 DUS008 000000	LANXESS GmbH	Nylon 6	Durethan®