Order Products : sales@su-jiao.com

Miramid® SP10S

Category:	Nylon 66 , Polyamide 66
Manufacturer:	BASF Leuna GmbH
Trademark:	Miramid®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	KDXqYy_Miramid-SP10S.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Miramid® SP10S is a Polyamide 66 (Nylon 66) material. It is available in Europe for injection molding.

Important attributes of Miramid® SP10S are:

Chemical Resistant

Good Mold Release

Impact Modified

Impact Resistant

Mold Release Agent

Typical applications include:

Automotive

Construction Applications

Electrical/Electronic Applications

Engineering/Industrial Parts

General Information
Additive	Impact Modifier Mold Release
Features	Fuel Resistant Good Flow Good Impact Resistance Good Mold Release Grease Resistant Oil Resistant Solvent Resistant
Uses	Automotive Applications Building Materials Electrical/Electronic Applications Engineering Parts
Forms	Granules
Processing Method	Injection Molding
Multi-Point Data	Isothermal Stress vs. Strain (ISO 11403-1) Secant Modulus vs. Strain (ISO 11403-1)

Physical	Dry	Conditioned	Unit	Test Method
Density	1110	--	kg/m³	ISO 1183 ¹
Water Absorption				ISO 62 ²
Saturation	7.0	--	%
Equilibrium	2.5	--	%

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile modulus	2300	1900	MPa	ISO 527-2 ³
Tensile Stress (Yield)	60.0	50.0	MPa	ISO 527-2 ⁴
Tensile Strain (Yield)	8.0	15	%	ISO 527-2 ⁵
Nominal Tensile Strain at Break	40	> 50	%	ISO 527-2/50

Impact	Dry	Conditioned	Unit	Test Method
Charpy notched impact strength				ISO 179/1eA ⁶
-30°C	11.0	--	kJ/m²
23°C	20.0	30.0	kJ/m²
Charpy impact strength				ISO 179/1eU ⁷
-30°C	No Break	--
23°C	No Break	No Break

Thermal	Dry	Conditioned	Unit	Test Method
Deflection Temperature Under Load				ISO 75-2 ⁸
0.45 MPa	170	--	°C
1.8 MPa	65.0	--	°C
Melting Temperature (DSC)	260	--	°C	ISO 3146

Electrical	Dry	Conditioned	Unit	Test Method
Volume resistivity	1.0E+13	1.0E+10	ohms·m	IEC 60093 ⁹
Dielectric Constant (1 MHz)	3.10	5.00		IEC 60250
Dissipation Factor (1 MHz)	0.020	0.10		IEC 60250 ¹⁰
Comparative tracking index	600	--		IEC 60112 ¹¹

Injection	Dry	Unit
Processing (Melt) Temp	280 to 300	°C
Mold Temperature	70.0 to 80.0	°C

Note Message
1 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
2 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
3 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
4 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
5 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
6 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
7 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
8 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
9 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
10 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
11 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.

Resin Grade	Manufacturer	Category	Trademark
VENYL UFC108	AD majoris	Nylon 66	VENYL
NEFTEKHIM PP 3839P	Nizhnekamskneftekhim Inc.	PP Homopolymer	NEFTEKHIM PP
AIE PET 40G3	Asia International Enterprise (Hong Kong) Limited	PET	AIE PET
Ateva® 1615	Celanese EVA Performance Polymers	EVA	Ateva®
Sylvin 7833-90 Brown 7152	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin