Order Products : sales@su-jiao.com

Europrene® N 4560

Category:	NBR , Acrylonitrile Butadiene Rubber
Manufacturer:	Versalis S.p.A.
Trademark:	Europrene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	KCvg5Q_Europrene-N-4560.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Europrene® N 4560 is a cold polymerized acrylonitrile-butadiene copolymer made at the Porto Torres production facility in Italy. A non staining antioxidant is added during the production process. Europrene® N 4560 is characterised by the highest oil and aliphatic hydrocarbon swelling resistance among the Europrene N grades. Mechanical properties decay of articles based on this elastomer is very limited also after long contact time with fuels whereas permeability of vulcanised articles is very low. The vulcanization can be performed using sulphur based systems or with peroxides. The low temperature properties can be improved by adding polar plasticizers as synthetic esters of adipic, sebacic or phtalic acids. If the finished rubber article requires particular resistance to heat, light and ozone resistance, then suitable protective agents as amine or phenolic antioxidants have to be added in the compounding process. Gaskets for oil bath, transformers, fuel hoses, oil sealing rings, gaskets for hydrocarbon ducts, flat gaskets for carburettors, etc.

Message

Europrene® N 4560 is a cold polymerized acrylonitrile-butadiene copolymer made at the Porto Torres production facility in Italy. A non staining antioxidant is added during the production process.

Europrene® N 4560 is characterised by the highest oil and aliphatic hydrocarbon swelling resistance among the Europrene N grades. Mechanical properties decay of articles based on this elastomer is very limited also after long contact time with fuels whereas permeability of vulcanised articles is very low. The vulcanization can be performed using sulphur based systems or with peroxides. The low temperature properties can be improved by adding polar plasticizers as synthetic esters of adipic, sebacic or phtalic acids. If the finished rubber article requires particular resistance to heat, light and ozone resistance, then suitable protective agents as amine or phenolic antioxidants have to be added in the compounding process.

Gaskets for oil bath, transformers, fuel hoses, oil sealing rings, gaskets for hydrocarbon ducts, flat gaskets for carburettors, etc.

General Information
Additive	Antioxidant
Features	Antioxidant Fuel Resistant Hydrocarbon Resistant Oil Resistant
Uses	Gaskets
Appearance	Yellow
Forms	Bale

Physical	Nominal Value	Unit	Test Method
Mooney Viscosity (ML 1+4, 100°C)	60	MU	ASTM D1646
Acrylonitrile Content	45.0	wt%	ASTM D3533
Ash Content	< 0.5	wt%	ASTM D5667
Organic Acid	< 0.5	wt%	ASTM D5774
Soap	< 0.6	wt%	ASTM D5774
Volatile Matter	< 0.70	wt%	ASTM D5668

Resin Grade	Manufacturer	Category	Trademark
Tecnoflon® FOR 532	Solvay Specialty Polymers	Fluorelastomer	Tecnoflon®
Asrene® UF 1820S1	Chandra Asri Petrochemical	LLDPE	Asrene®
Dryflex® A1 600601	ELASTO	SEBS	Dryflex®
Durolon® IR2200	Unigel Plásticos	PC	Durolon®
MAJORIS FE124 - 8487	AD majoris	PP, Unspecified	MAJORIS